CRU QX310 v2 Kullanıcı Kılavuzu - Sayfa 4
Muhafaza CRU QX310 v2 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. CRU QX310 v2 12 sayfaları.
Sayfayı Yazdır
4
QX310 v2 User Manual
1.4 LED Behavior
LED
Drive Power
Drive Activity/
Error
1.5 Warnings and Notices
•
The circuit boards within the product are susceptible to static electricity. Proper grounding
is strongly recommended to prevent electrical damage to the product or other connected
devices, including the computer host.
•
Avoid placing the drive carrier close to magnetic devices, high voltage devices, or near a heat
source. This includes any place where the product will be subject to direct sunlight. Do not
allow water to make contact with the carrier or receiving frame.
•
Before starting any type of hardware installation, please ensure that all power switches have
been turned off and all power cords have been disconnected to prevent personal injury and
damage to the hardware.
•
To avoid overheating, the QX310 v2 should be operated in a well-ventilated area.
•
When unplugging cables, always squeeze the cable's overmold (if it has one) to release the
connector latches before unplugging the cable. Failure to do so may result in damage the
latches on the cable and prevent it from latching securely in the future.
•
SFF-8643 cables require 85Ω impedence for PCIe/NVMe compatibility when used with the
QX310 v2. Compatible adapter cards and cables, as well as a 5.25-inch bay adapter and an
M.2 adapter are available for purchase on the QX310 product page at cru-inc.com.
•
An M.2 slot (with CRU OCuLink to M.2 Slot Adapter) or a PCIe 3.0 slot on your computer is
required for full performance. However, older PCIe slots will also work with reduced perfor-
mance.
Color
State
Blinking
Green
Solid
Green/
Alternating
Red
Color
Blinking
Amber
Off
Solid
The QX310 v2 is powering on.
The QX310 v2 is on.
The fan inside the QX310 v2 has failed. Contact Technical Sup-
port for a replacement.
The device inside the QX310 v2 is being accessed by your
computer.
M.2 drive only: The device inside the QX310 v2 is idle.
U.2 drive only: The device inside the QX310 v2 is idle.
Description