CRU RAX RAX211-XJ Kullanıcı Kılavuzu - Sayfa 6

Depolama CRU RAX RAX211-XJ için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. CRU RAX RAX211-XJ 9 sayfaları. 2-bay

CRU

a) Click on the drive in the window to the left (see picture below).

b) Click the Erase tab in the window to the right (see picture below).

c) Select the format type. Most users prefer Mac OS Extended with Journaling (HFS+), which is required

for compatibility with Time Machine (OS 10.5 or newer). If you need to use your RAX with both Mac and

Windows computers, select MS-DOS File System instead.

d) Enter a name for the new volume and then click "Erase" to start the process.

4.1.3 Mounting and unmounting volumes

If the hard drives installed in RAX are already formatted, an icon representing the

drive's volume will appear (mount) on the desktop. You can begin using the volume

right away. If the drive is unformatted, a message will appear on the desktop saying

that the disk is unreadable. You can use OS X's Disk Utility to easily format the drive

(see section above).

Unmount the volume before powering down the unit by dragging the volume's icon to

the trash bin, or by selecting the volume then pressing Command-E. Disconnecting

the unit without first unmounting the volume can result in data loss.

To activate this feature, you must first install OS X on the hard drive in your carrier. The easiest way to do

this is to clone an existing system drive using a utility such as Carbon Copy Cloner or Super Duper. Next,

go to System Preferences

volume from which you wish to boot. Another method is to hold down the Option key during boot up. A

screen should appear that allows you to select the volume you wish to use. This is useful if you wish to

boot from your RAX hard drive only some of the time.

4.2 Usage with Windows operating systems

RAX uses 3.5-inch SATA (Serial-ATA) hard drives only. RAX does not require drivers for operation under

Windows XP, Vista, or 7. However, if you install a host card specifically to work with this product, that

card may require drivers. See your card's User Manual for drivers and instructions.

If you purchased your RAX pre-populated with a hard drive, this step should not be necessary unless you

wish to change the format or erase the drive. To format, use the Disk Management utility.

U s e r M a n u a l f o r 2 - B a y R AX ( A9-210-0008) REV 1.0

Startup Disk. A window will list the available bootable volumes. Select the

- 6 -