CRU Dataport Data Express DX175 Kullanıcı Kılavuzu - Sayfa 5

Adaptör CRU Dataport Data Express DX175 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. CRU Dataport Data Express DX175 10 sayfaları.

CRU Data Express DX175 User Manual

3.4 Fan SpEED

Adjust the fan speed by adjusting the "Fan" jumper located on the rear of the DX175 frame.

Fan jumper Settings

high

- Fan is set to high speed

Low

- Fan is set to low speed

auto

- Enables the DX175's built-in Temperature Control Cooling Sensor (TCCS). The fan speed is auto-

matically adjusted depending on the temperature of the drive carrier.

When you first mount a drive to a Windows operating system, a pop-up window will ask you if you

would like to format it. Click

system below. If the prompt does not pop up, use the Disk Management utility by following the steps

below for your specific Windows operating system:

Windows 10

a. Right-click on the

b. The drive should appear in the list of Disks in the lower pane. You may need to scroll down to

see it. If the drive is already formatted, you can identify it easily by its volume name. If the drive

is not initialized or is brand new, a window will pop up asking you to select a partition type.

Select

gpT

and press oK.

c. To format the volume, right-click the

1) and select

new Simple volume...

d. Unless you wish to customize the settings in these dialog prompts, click

Partition, Specify Volume/Partition Size, and Assign Drive Letter or Path dialog prompts, leaving

the default settings.

Figure 1.

The Disk Management window in Windows 10 is very similar to the one found in Windows 8. The

Drive Properties Box is highlighted in red.

Protecting Your Digital Assets

Format Disk

and skip to Step E in the instructions for your operating

Start Button

and then select

Drive properties Box

Disk

management.

of the drive (highlighted red in Figure

on the Select