aeolus AEOLIAN TD-901GT Kullanıcı El Kitabı - Sayfa 4

Kurutucu aeolus AEOLIAN TD-901GT için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. aeolus AEOLIAN TD-901GT 4 sayfaları. Pet dryer

Carbon Brush

Remove the retaining screws on

front cap by cross screwdriver in

Press the clip down on the connectors of

arrow direction, and open the front

the wires to motor, unplug the wires and

cap.

remove the front cap.

Remove these three screws which

Lift the little iron panel up with flathead

fixing the motor bracket one by

screwdriver, open the brass clip which

one.

holding the motor wire to remove the old

carbon brushes.

Twist the little iron to a certain angle to

Put the new brushes in, and tighten the

fix the carbon brush brass rear cap.

brass clip with nipper pliers.

Put all the parts back in reverse order.

※ The power supply must be cut off before changing carbon brushes.

Dryer Stand

Slide the latch to fix the

Slide the dryer into position

of the bracket in arrow

dryer in showed direction.

direction.

Groomers Third Arm

Fix the nozzle with the metal clamp.

Wall-mounting Bracket

Fix the retaining screws in broken line

showed in the picture; examine the strength

and stability after works done.

The wall which you want to attach the bracket

to must be a solid wall which could bear

weight loading!