Cruise control AP900Ci Hızlı Kurulum Kılavuzu

Otomobil Aksesuarları Cruise control AP900Ci için çevrimiçi göz atın veya pdf Hızlı Kurulum Kılavuzu indirin. Cruise control AP900Ci 11 sayfaları.

Sayfayı Yazdır
CRUISE CONTROL AP900Ci/ GC90Ci
QUICK INSTALLATION MANUAL
1
CAN-BUS CONNECTION
Engine control
module
T-harness
Accelerator
Model specific T-harness
will be connected between
connectors of accelerator
pedal
If analog inputs activated
connect them like described
on chapter 8 and 9.
Diagnostic
ProTeam OÜ
Männiku tee 104,
11216 Tallinn, Estonia
Tel: +372 672 6308
www.proteam.ee
Control Module (CM)
socket
ORANGE
BLUE
OBD
connector
BLUE/ WHITE
OBD connector is most
common connection point of
CAN-bus wires
By installation refer
connection points
shown on model specific
installation manual
of Beijer Automotive
delivered with the system!
The OBD adapter supplied
with the GC90Ci kit must
not be used. Wires must be
soldered behind the OBD
connector!
Ignition
+12V
CAN High
pos. 6
CAN Low
pos. 14