Ariesys AMK Series Kullanıcı Referans Kılavuzu - Sayfa 9

Ağ Donanımı Ariesys AMK Series için çevrimiçi göz atın veya pdf Kullanıcı Referans Kılavuzu indirin. Ariesys AMK Series 10 sayfaları.

Sayfayı Yazdır

QUICK REFERENCE SHEET

Command

Hotkeys

Select PC Port

ScrLk + ScrLk + (x)

x = 1~2/ 1~4 for PC port number

Select Hub Port

ScrLk + ScrLk + (Fx)

Control

Fx = F1~F2/ F1~F4 (Fx is a function key)

x = 1~2/ 1~4 for hub port number

Select Audio&Mic Port

ScrLk + ScrLk + (Fy)

Fy = F5~F6/ F5~F8 (Fy is a function key)

y = 5~6/ 5~8 for audio&mic port number

Bind PC and Hub Port

ScrLk + ScrLk + Z

Control Switching

Unbind PC and Hub

ScrLk + ScrLk + X

Port Control Switching

Bind PC and

ScrLk + ScrLk + Q

Audio&Mic Switching

Unbind PC and

ScrLk + ScrLk + W

Audio&Mic Switching

Previous PC port

ScrLk + ScrLk + ↑ (arrow up)

Next PC port

ScrLk + ScrLk + ↓ (arrow down)

ScrLk + ScrLk +

Previous PC port

Beep Sound On/Off

ScrLk + ScrLk + B

Define Hotkey

ScrLk + ScrLk + H + (y)

Preceding Sequence

y = SCROLL LOCK, CAPS, ESC, F12 or

NUM LOCK

Autoscan

ScrLk + ScrLk + S

Autoscan with

ScrLk + ScrLk + S + (z)

Programmable Delay

z = 0~9

Time

Stop Autoscan

Press any button

Notes:

1. The USB keyboard hotkeys allows you a faster and broader control for your KVM switching operation in addition to the front-panel

button. If you have configured a hotkey preceding sequence other than two consecutive scroll locks, here you should change your

hotkey sequence accordingly. (For preceding sequence key configuration, please refer to "Operation" in above table.)

2. When the binding of PC & USB hub port control switching is enabled by the hotkey sequence: ScrLk + ScrLk + Z, any PC and hub

port control switching are bound together. To remove this binding, use the hotkey sequence: ScrLk + ScrLk + X.

3. When the binding of PC and audio&mic switching is enabled by the hotkey sequence: ScrLk + ScrLk + Q, any PC and audio&mic

switching are bound together. To remove this binding, use the hotkey sequence: ScrLk + ScrLk + W.

(Backspace)

Description

Select the active PC port

(Jointly select PC port / hub port control / audio mic, if

binding is enabled)

Select the PC port that control all USB hub ports

(Jointly select PC & hub port control, if PC/ hub port control

binding is enabled)

Select the active audio&mic port

(Jointly select PC & audio&mic port, if binding is enabled)

Enable the binding of PC port and hub port control switching.

(Once this feature is enabled, any pc and/or hub port control

switching is bound together) (factory default)

Disable the binding of PC port and hub port control switching

Enable the binding of PC port and audio&mic switching.

(Once this feature is enabled, any pc and/or audio&mic

switching is bound together) (factory default)

Disable the binding of PC port and audio&mic switching

Select the previous connected PC port

(Jointly select PC/ hub port control, if binding is enabled)

Select the next connected PC port

(Jointly select PC/ hub port control, if binding is enabled)

Toggle between the previous port and current port

Toggle on/off the beep sound while autoscanning

Select the hotkey preceding sequence among 5 alternative

keys

Autoscan through every connected port for quick screen

browsing of each port (scan delay = 5 sec.).

Autoscan with a user-defined delay time within a range of 10

~ 100 seconds

Terminate autoscan activity

９