Crutchfield 016 0045 Ana Sayfa - Sayfa 5

Araba Stereo Sistemi Crutchfield 016 0045 için çevrimiçi göz atın veya pdf Ana Sayfa indirin. Crutchfield 016 0045 8 sayfaları. For dodge dakota

016 0045

Rear Speakers -- Standard Cab

1. Pry open seat belt hanger cover.

Remove one (1) Torx T-47 bolt securing

seat belt hanger (Figure 1).

2. Pry away rear side panel starting at the

top and working downward to speaker

location (Figure 2).

3. Remove two (2) phillips screws securing

speaker to rear of side panel. Disconnect

speaker wiring connector and remove

speaker (Figure 3).

4. Secure replacement speaker to side panel

with screws previously removed. Connect

speaker wiring adaptor of replacement

speaker to vehicle speaker connector.

5. Test speaker operation and reinstall side

panel. Note: Be sure seat belt hanger is

secure.

FIGURE 1

Seat Belt Hanger Cover

FIGURE 2

Rear Side Panel

NOTES:

Please read first

• Instructions show factory size speakers or speakers

with adaptor brackets only. Cutting or fabricating (not

shown) will be required for other speaker sizes.

FIGURE 3

SAFETY CHECK

Make sure seats and seat belts anchors are

secured to manufacturers specifications.

1-800-955-9094

Technical Service