Crutchfield 019 0021 Kurulum Talimatları Kılavuzu - Sayfa 12

Araba Stereo Sistemi Crutchfield 019 0021 için çevrimiçi göz atın veya pdf Kurulum Talimatları Kılavuzu indirin. Crutchfield 019 0021 14 sayfaları. Ford mustang 2015 complete car audio

Sayfayı Yazdır

019 0021

Trunk Subwoofer

1. Remove three (3) Torx T20 screws securing

enclosure cover panel. Remove panel

(Figure 1).

2. Remove one (1) Torx T40 screw and two (2)

1/2" bolts securing enclosure to body.

Disconnect wiring harness and remove

enclosure (Figures 2 & 3).

3. Remove one (1) 8mm screw inside cavity

on rear of enclosure and six (6) Torx T20

screws on front of enclosure (Figures 4 & 5).

4. Remove grille, then pry up subwoofer.

Disconnect wiring harnesses and remove.

5. Break off alignment pins on mounting

surface to allow proper fit of new speaker

(Figure 6).

6. Place new speaker in location and mark new

mounting holes. Remove speaker and drill

holes with a 1/8" bit.

7. Connect speaker wiring and secure speaker

to enclosure.

8. Test speaker operation and reassemble by

reversing disassembly steps.

CAUTION:

Always be careful when drilling or cutting in a vehicle. WEAR

EYE PROTECTION. Be aware of things such as wiring,

windows, fuel lines and safety devices. Check depth and

location to avoid damage to vehicle appearance.

FIGURE 1

Enclosure Cover Panel

FIGURE 3

FIGURE 5

(1 of 6 screws shown)

1-800-955-9094

TECHNICAL SUPPORT

NOTES:

Please read first

• Instructions show factory size speakers or speakers

with adaptor brackets only. Cutting or fabrication (not

shown) will be required for other speaker sizes.

FIGURE 2

FIGURE 4

FIGURE 6

Alignment Pin

(1 of 2 shown)