feature, to prevent settings from accidentally being changed.
1.
Press and hold the
v for 3 seconds. Both the
will begin to flash.
2.
To Enable:
Within 5 seconds press +, then -, then +, then -.
The
icon will now be visible.
To Disable: Within 5 seconds press -, then +, then -, then +.
The
icon will not be visible.
!
NOTE: The LPC can be locked in either the Comfort or Economy
Setting. Ensure that the desired icons are present when locking is
complete.
maintenance
CAUTION: Before removing the front cover for cleaning, make
certain the power has been turned off at the circuit breaker
panel, to prevent electric shock.
CAUTION: To avoid burns, allow adequate time for the element
and body casing to cool before attempting to work on the linear
convector.
The LPC series contain no moving parts. Since the appliance
contains no moving parts little maintenance is required beyond
vacuum cleaning. It is however essential that the linear convector
is not operated with an accumulation of dust or dirt on the element,
as this can cause a build up of heat and eventual damage. For this
reason the linear convector must be inspected regularly, depending
upon conditions and at least at yearly intervals. Once cleaning is
complete replace the front cover and restore power.
!
NOTE: The user can perform cleaning ONLY. All other servicing
should be performed by qualified service personnel.
1367 Industrial Road Cambridge ON Canada N1R 7G8
1-888-346-7539 www.dimplex.com
In keeping with our policy of continuous product improvement, we reserve the right to make changes without notice.
© 2012 Dimplex North America Limited
Warranty
and
Icons
The Manufacturer warrants the Linear Proportional Convector and
components of the enclosed product against any defect in material or
workmanship for a period of one year from the date of purchase, with the
exception of the elements which are warranted to be free from defect in
material and workmanship for ten years. In full satisfaction of any claims
under this Warranty the Manufacturer will repair or replace without charge, in
its factory or in the field as it alone may decide, any parts which in its opinion
are defective.
The Manufacturer shall not be responsible for any transportation or shipping
costs in relation to such repair or replacement except as specifically
assumed by it. Misuse of this product or repairs by persons other than the
Manufacturer's authorized personnel without the Manufacturer's written
approval will void this Warranty.
This Warranty is in lieu of all other warranties or conditions whether
expressed or implied including but not limited to those of merchantability or
fitness for purpose and shall constitute the sole remedy of the Purchaser
and the sole liability of the Manufacturer in respect of the sale of the product,
whether in the nature of breach or breach of fundamental term, or of
negligence or otherwise.
The Manufacturer shall not be liable for any special, indirect or
consequential damages or for any damages resulting from removal or
replacement of a Linear Proportional Convector subject to warranty claim
without the Manufacturer's authorization.
This Warranty is transferable by the original consumer purchaser of the
product. Any claims under this Warranty must be submitted in writing to
the Service Manager, Dimplex North America Ltd., 1367 Industrial Rd.,
Cambridge, Ontario N1R 7G8, Canada.
3
Sayfayı Yazdır