Aeon Labs Aeotec MULTISENSOR 6 Manuel - Sayfa 6

Aksesuarlar Aeon Labs Aeotec MULTISENSOR 6 için çevrimiçi göz atın veya pdf Manuel indirin. Aeon Labs Aeotec MULTISENSOR 6 14 sayfaları.
Ayrıca Aeon Labs Aeotec MULTISENSOR 6 için: Kullanıcı Kılavuzu (11 sayfalar)

Sayfayı Yazdır

For a battery powered installation;

1. Remove the rear part of your sensor as shown in the previous

step 1.

2. Insert CR123A batteries oriented according to the picture below.

Your MultiSensor is now powered on.

Secondary battery

holder

Primary battery

holder

Note: If you just have only one CR123A battery, please insert the

battery into the primary battery holder.

Add your MultiSensor to your Z-Wave network.

It's now time to sync your MultiSensor with a Z-Wave network. The

following instructions explain how to do this using a Z-Stick or a

Minimote from Aeotec. If you're using an alternative controller for

your Z-Wave network, please refer to its user manual for network

inclusion instructions.

If you're using a Z-Stick:

THAT PORTION OF PRODUCTS WITH RESPECT TO WHICH DAMAGES

ARE CLAIMED. ALL CLAIMS OF ANY KIND ARISING IN CONNECTION

WITH THIS AGREEMENT OR THE SALE OR USE OF PRODUCTS SHALL BE

DEEMED WAIVED UNLESS MADE IN WRITING WITHIN THIRTY (30) DAYS

FROM AEON LABS'S DELIVERY, OR THE DATE FIXED FOR DELIVERY IN

THE EVENT OF NONDELIVERY.

THE INDEMNITY AND WARRANTY IN ABOVE ARE EXCLUSIVE AND IN LIEU

OF ALL OTHER INDEMNITIES OR WARRANTIES, WHETHER EXPRESS OR

IMPLIED, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY

AND FITNESS FOR A PARTICULAR PURPOSE.

FCC NOTICE (for USA)

THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV

INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO

THIS EQUIPMENT.SUCH MODIFICATIONS COULD VOID THE USER'S

AUTHORITY TO OPERATE THE EQUIPMENT.

STORE INDOORS WHEN NOT IN USE. SUITABLE FOR DRY LOCATIONS.

DO NOT IMMERSE IN WATER. NOT FOR USE WHERE DIRECTLY EXPOSED

TO WATER.

This device complies with Part 15 of the FCC Rules. Operation is

subject to the following two conditions:

This device may not cause harmful interference, and

This device must accept any interference received, including

interference that may cause undesired operation. This equipment

has been tested and found to comply with the limits for a Class

B digital device, pursuant to part 15 of the FCC Rules. These

limits are designed to provide reasonable protection against

harmful interference in a residential installation. This equipment