Dimplex DXIONCF Manuel - Sayfa 4

Fan Dimplex DXIONCF için çevrimiçi göz atın veya pdf Manuel indirin. Dimplex DXIONCF 8 sayfaları.

How to assemble the base

The base of the tower fan comes in two parts, each part joins together and fits around

the oscillation base of the tower. The two parts have interlocking holes and bosses

which easily slide/fit into each other when aligned. The back half has cable hooks and

a cut-out on the edge to allow the power supply cord to exit flush with the bottom of the

base.

1. First attach the back half of the base, aligning the holes in the base with the screw

holes in the back side of the oscillation base of the tower, feed the power cord

under the two hooks and through the hole at the edge.

2. Then align the bosses on the front half of the base with the holes on the back half

and slide them together against the bottom of the tower.

3. Secure the base to the bottom of the tower with the four wing head screws sup-

plied, two through the front half and two through the back half.

4. The product can now be stood upright on its secured base with the cable passing

out the rim at the back flush with the standing surface.

Remote Control

The remote control for the appliance comes complete with a

CR2025 3V battery fitted. Before using the remote, please

pull out the plastic insulation tab to connect the battery to the

remotes circuit. To replace the battery simply unclip and

remove the battery cover on the back and replace the

battery, then carefully refit the cover and snap it into place.

(Figure 1)

LED

(Figure 2)