Pioneer AVH-P3200BT Kurulum Kılavuzu - Sayfa 7

Araç Alıcısı Pioneer AVH-P3200BT için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Pioneer AVH-P3200BT 40 sayfaları. Dvd, rds, av receiver
Ayrıca Pioneer AVH-P3200BT için: Kurulum Kılavuzu (8 sayfalar)

Sayfayı Yazdır

Connecting the units

4 m (13 ft. 1 in.)

Wired remote input

Hard-wired remote control adaptor can be connected

(sold separately).

Fuse resistor

Violet/white

Of the two lead wires connected to the back lamp, connect the one

in which the voltage changes when the gear shift is in the

REVERSE (R) position. This connection enables the unit to

sense whether the car is moving forwards or backwards.

Yellow/black

If you use an equipment with Mute function, wire this lead to

the Audio Mute lead on that equipment. If not, keep the Audio

Mute lead free of any connections.

Connection method

1. Clamp the lead.

Note:

· The position of the parking brake switch depends on the vehicle model. For details,

consult the vehicle Owner's Manual or dealer.

Light green

Used to detect the ON/OFF status of the parking

brake. This lead must be connected to the power

supply side of the parking brake switch.

Blue/white

Connect to system control terminal of the power amp or

auto-antenna relay control terminal (max. 300 mA 12 V DC).

With a 2 speaker system, do not connect anything to the speaker leads

that are not connected to speakers.

Microphone (AVH-P3200BT only)

2. Clamp firmly with

needle-nosed pliers.

Power supply side

Ground side

Note:

· Change the initial setting of this unit (refer

to the Operation Manual). The subwoofer

output of this unit is monaural.

Parking brake

switch