Pioneer AVIC-X1 Donanım Kılavuzu - Sayfa 21

Araç Alıcısı Pioneer AVIC-X1 için çevrimiçi göz atın veya pdf Donanım Kılavuzu indirin. Pioneer AVIC-X1 30 sayfaları. Dvd navigation av headunit
Ayrıca Pioneer AVIC-X1 için: Hızlı Kılavuz (12 sayfalar)

Sayfayı Yazdır

MAN-AVIC-X1-EN HW.book Page 19 Friday, January 16, 2004 11:41 AM

Appendix

Troubleshooting

About troubleshooting other than description

below

Appendix of the Operation Manual

Symptom

Cause

There's no picture.

The handbrake cord is not connected.

The handbrake is not applied.

The operation is prohibited for the disc.

The icon

displayed, and

The operation is not compatible with the

operation is not

disc's organization.

possible.

The picture stops

Reading of data has become impossible

(pauses) and the unit

during playback.

cannot be operated.

The picture is

The aspect setting is incorrect for the

stretched, the aspect is

display.

incorrect.

Rear display picture

• The source disc being listened to with the

disappears.

product has been ejected.

• The REAR button was pressed and REAR

ON mode switched off.

• There was a problem with the rear display

or a faulty wiring connection, for example.

• Rear View is selected on the screen.

• When the gearstick is in [R], displays rear

view camera images. (When "NAVI" is

selected in REAR DISP menu.)

Nothing is displayed

The setting for the rear view camera is

and the touch panel

incorrect.

keys cannot use.

The gearstick was placed in [R] when the

rear view camera was not connected.

LCD Panel knocking

Incorrect setting of angle.

against your vehicle's

console or dashboard.

Video image appears

This happens when videos are viewed in

grainy.

CINEMA or ZOOM mode.

Action (See)

Connect a handbrake cord, and apply the

handbrake.

Connect a handbrake cord, and apply the

handbrake.

This operation is not possible.

After pressing 7 once, start playback once

more.

Select the appropriate setting for your

display. (Page 16)

• Before ejecting the disc, switch the

source. This problem may occur when

certain connection methods are used.

• Press the REAR button to turn REAR ON

mode on.

• Check the rear display and its connection.

• Select view mode other than Rear View.

• Move the gearstick other than turn [R]

position. (Select SOURCE in REAR DISP

menu.)

Connect a rear view camera correctly.

Press NAVI/AV button to return to the

source display and then select the correct

setting for CAMERA.

About CAMERA setting

Operation

Manual

Press ANGLE (+/–) to adjust the LCD

angle. Forcibly adjusting the LCD panel by

hand may damage it.

Select a different mode to view videos.