Pioneer AVIC-Z1 Donanım Kılavuzu - Sayfa 10

Araç Alıcısı Pioneer AVIC-Z1 için çevrimiçi göz atın veya pdf Donanım Kılavuzu indirin. Pioneer AVIC-Z1 27 sayfaları. Hdd multimedia av navigation server
Ayrıca Pioneer AVIC-Z1 için: Ürün Yazılımı Güncelleme Talimatları (5 sayfalar), Kullanıcı El Kitabı (34 sayfalar), Hızlı Başlangıç Kılavuzu (2 sayfalar)

Sayfayı Yazdır

When recording please pay

attention to these points;

• Pioneer does not compensate for the contents

that could not be recorded or any loss of

recorded data due to a malfunction or failure of

the navigation system.

• The data recorded on the navigation system is

not allowed to be used without a permission

from its right holder under copyright law

except for personal entertainment.

• Make sure to check the recording operation

before recording and check the recorded con-

tents after recording.

• Recording is not guaranteed for all CDs.

About the data saved or

recorded by the customer

• The data saved or recorded onto this naviga-

tion system by the customer cannot be

extracted from the navigation system, and

those service cannot be accepted.

• The data saved or recorded onto this naviga-

tion system by the customer cannot be guaran-

teed during repair or service. Lost data that

was saved or recorded by the customer is not

guaranteed.

• Due to copyrights, the music data recorded

into the Music Library cannot be backed up

during repair or service.

Notes for LCD Screen

To protect the LCD screen

❒ Do not allow direct sunlight to fall on the LCD

screen when this navigation system is not

being used. Extended exposure to direct sun-

light can result in LCD screen malfunction

due to the resulting high temperatures.

❒ When using a cellular phone, keep the

antenna of the cellular phone away from the

display to prevent disruption of the video with

disturbances such as spots or colored stripes.

❒ Never touch the LCD screen with anything

besides your finger when operating the Touch

Panel functions. The LCD screen can scratch

easily. (The stylus is supplied for special cali-

brations. Do not use the stylus for normal

operation.)

➲ For details about handing the LCD panel ➞

Page 21

For viewing LCD comfortably

Due to its construction, the viewing angle of the

LCD screen is limited. The viewing angle can be

increased, however, by using [Brightness] to

adjust the black density of the video. When using

for the first time, adjust the black density in

accordance with the viewing angle to adjust for

clear viewing. [Dimmer] can also be used to

adjust the brightness of the LCD screen itself to

suit your personal preference.

Notes for Internal Memory

Before removing the vehicle bat-

tery

If the battery is disconnected or discharged, the

memory will be erased and must be repro-

grammed.

➲ For details, refer to "Returning the Navigation

System to the Default or Factory Settings" in

the the Operation Manual.

Resetting the Microprocessor

• Pressing the RESET button mainly clears

the settings for the AV source without

clearing all the items of navigation func-

tions. Please see section "Returning the

Navigation System to the Default or Fac-

tory Settings" of the Operation Manual

before clearing.

Pressing the RESET button lets you reset the

microprocessor to its initial settings without

changing the condition memory.

➲ Condition Memory ➞ Page 17

The microprocessor must be resetted under the

following conditions:

• Prior to using this navigation system for the

first time after installation.

• If the product fails to operate properly.

• If there appear to be problems with the opera-

tion of the system.