Pioneer DEH P4800MP Kullanım Kılavuzu - Sayfa 17

Araç Alıcısı Pioneer DEH P4800MP için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Pioneer DEH P4800MP 36 sayfaları. Multi-cd control high power cd/mp3/wma player with rds tuner

Sayfayı Yazdır

MAN-DEH-P4800MP-GB.fm Page 17 Thursday, September 29, 2005 11:55 AM

MP3/WMA/WAV Player

Playing MP3/WMA/WAV

These are the basic steps necessary to play an MP3/WMA/WAV with your built-in CD

player. More advanced MP3/WMA/WAV operation is explained starting on this page.

Track number indicator

Shows the track (file) currently

playing.

Folder number indicator

Shows the number of folder

currently playing.

Play time indicator

Shows the elapsed playing time of

the current track (file).

WMA indicator

Shows when a WMA file is playing.

MP3 indicator

Shows when an MP3 file is playing.

1. Insert a CD-ROM into the CD loading slot.

Playback will automatically start.

• You can eject a CD-ROM by pressing EJECT.

• To avoid a malfunction, make sure that no metal object comes into contact with the

terminals when the front panel is open.

2. Use VOLUME to adjust the sound level.

Rotate it to increase or decrease the volume.

3. Press 8 or 2 to select a folder.

• You cannot select a folder that does not have an MP3/WMA/WAV file recorded in it.

• To return to folder 01 (ROOT), press and hold BAND. However, if folder 01 (ROOT)

contains no files, playback commences with folder 02.

4. To perform fast forward or reverse, press and hold 4 or 6.

• This is fast forward and reverse operation only for the file being played.

• If you select ROUGH, pressing and holding 4 or 6 enables you to search every 10

tracks in the current folder. (Refer to "Selecting the search method" on page 19.)

5. To skip back or forward to another track, press 4 or 6.

Pressing 6 skips to the start of the next track. Pressing 4 once skips to the start of the

current track. Pressing again will skip to the previous track.

Notes

• When playing discs with MP3/WMA/WAV files and audio data (CD-DA) such as CD-EXTRA

and MIXED-MODE CDs, both types can be played only by switching mode between MP3/

WMA/WAV and CD-DA with BAND.

• If you have switched between playback of MP3/WMA/WAV files and audio data (CD-DA),

playback starts at the first track on the disc.

• The built-in CD player can play back an MP3/WMA/WAV file recorded on CD-ROM. (Refer

to page 32 for files that can be played back.)

• Do not insert anything other than a CD into the CD loading slot.

• There is sometimes a delay between starting up CD playback and the sound being issued.

When being read, FORMAT READ is displayed.

• If you cannot insert a disc completely or if after you insert a disc the disc does not play, check

that the label side of the disc is up. Press EJECT to eject the disc, and check the disc for

damage before inserting it again.

• Playback is carried out in order of file number. Folders are skipped if they contain no files.

(If folder 01 (ROOT) contains no files, playback commences with folder 02.)

• When playing back files recorded as VBR (variable bit rate) files, the play time will not be

correctly displayed if fast forward or reverse operations are used.

• If the inserted disc contains no files that can be played back, NO AUDIO is displayed.

• If the inserted disc contains WMA files that are protected by digital rights management

(DRM), SKIPPED is displayed while the protected file is skipped.

• If all the files on the inserted disc are secured by DRM, PROTECT is displayed.

• There is no sound on fast forward or reverse.

• If an error message such as ERROR-11 is displayed, refer to "Understanding built-in CD

player error messages" on page 31.

• When an MP3/WMA/WAV disc is inserted, folder name and file name begin to scroll to the

left automatically.

Introduction of advanced built-in CD player (MP3/WMA/

WAV) operation

Function display

Shows the function status.

RPT indicator

Shows when repeat range is

selected to current track (file).

* Press FUNCTION to display the

function names.

Press FUNCTION repeatedly to switch between the following functions:

RPT (repeat play) – RDM (random play) – SCAN (scan play) – PAUSE (pause) –

COMP (compression and BMX) – FF/REV (search method)

• To return to the playback display, press BAND.

Note

• If you do not operate the function within about 30 seconds, the display is automatically

returned to the playback display.