Pioneer DEH P4800MP Kullanım Kılavuzu - Sayfa 22

Araç Alıcısı Pioneer DEH P4800MP için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Pioneer DEH P4800MP 36 sayfaları. Multi-cd control high power cd/mp3/wma player with rds tuner

Sayfayı Yazdır

MAN-DEH-P4800MP-GB.fm Page 22 Thursday, September 29, 2005 11:55 AM

Multi-CD Player

4. When you find the desired track (or disc) press 2 to turn scan play off.

SCAN :OFF appears in the display. The track (or disc) will continue to play.

• If the display has automatically returned to the playback display, select SCAN again

by pressing FUNCTION.

Notes

• After track or disc scanning is finished, normal playback of the tracks will begin again.

• If you turn scan play on during DSC and then return to the playback display, DSCN appears

in the display.

Pausing CD playback

Pause lets you temporarily stop playback of the CD.

1. Press FUNCTION to select PAUSE.

Press FUNCTION until PAUSE appears in the display.

2. Press 8 to turn pause on.

PAUSE:ON appears in the display. Play of the current track pauses.

3. Press 2 to turn pause off.

PAUSE:OFF appears in the display. Play will resume at the same point that you turned

pause on.

Using ITS playlists

ITS (instant track selection) lets you make a playlist of favorite tracks from those in the

multi-CD player magazine. After you have added your favorite tracks to the playlist you

can turn on ITS play and play just those selections.

Creating a playlist with ITS programming

You can use ITS to enter and play back up to 99 tracks per disc from up to 100 discs

(with the disc titles). (With multi-CD players sold before the CDX-P1250 and CDX-

P650, up to 24 tracks can be stored in the playlist.)

1. Play a CD that you want to program.

Press 8 or 2 to select the CD.

2. Press FUNCTION and hold until TITLE IN appears in the display, then press

FUNCTION to select ITS.

After TITLE IN is displayed, press FUNCTION repeatedly, the following functions

appear in the display:

TITLE IN (disc title input) – ITS (ITS programming)

3. Select the desired track by pressing 4 or 6.

4. Press 8 to store the currently playing track in the playlist.

ITS IN is displayed briefly and the currently playing selection is added to your playlist.

The display then shows ITS again.

5. Press BAND to return to the playback display.

Note

• After data for 100 discs has been stored in memory, data for a new disc will overwrite the

oldest one.

Playback from your ITS playlist

ITS play lets you listen to the tracks that you have entered into your ITS playlist. When

you turn on ITS play, tracks from your ITS playlist in the multi-CD player will begin to

play.

1. Select the repeat range.

Refer to "Repeating play" on page 21.

2. Press FUNCTION to select ITS-P.

Press FUNCTION until ITS-P appears in the display.

3. Press 8 to turn ITS play on.

ITS-P:ON appears in the display. Playback begins of those tracks from your playlist

within the previously selected MCD or DSC ranges.

• If no tracks in the current range are programmed for ITS play, then EMPTY is

displayed.

4. Press 2 to turn ITS play off.

ITS-P:OFF appears in the display. Playback will continue in normal order from the

currently playing track and CD.

Erasing a track from your ITS playlist

You can delete a track from your ITS playlist if ITS play is on.

If ITS play is already on, skip to step 2. If ITS play is not already on, press FUNCTION.

1. Play the CD with the track you want to delete from your ITS playlist, and turn ITS

play on.

Refer to "Playback from your ITS playlist" on this page.

2. Press FUNCTION and hold until TITLE IN appears in the display, then press

FUNCTION to select ITS.

After TITLE IN is displayed, press FUNCTION until ITS appears in the display.