Pioneer DEH-1300MP Kullanıcı El Kitabı - Sayfa 4

Araç Alıcısı Pioneer DEH-1300MP için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Pioneer DEH-1300MP 28 sayfaları. Cd receiver, autoradio cd, radio cd
Ayrıca Pioneer DEH-1300MP için: Kullanıcı El Kitabı (21 sayfalar)

Sayfayı Yazdır

Section

Operating this unit

Removing the front panel to protect your unit from

theft

1 Press the detach button to release the front

panel.

2 Push the front panel upward and pull it toward

you.

3 Always keep the detached front panel in a protec-

tion device such as a protection case.

Re-attaching the front panel

1 Slide the front panel to the left.

Make sure to insert the tabs on the left side of the

head unit into the slots on the front panel.

2 Press the right side of the front panel until it is

firmly seated.

If you cannot attach the front panel to the head

unit successfully, make sure that you are placing

the front panel onto the head unit correctly. For-

cing the front panel into place may result in da-

mage to the front panel or head unit.

Turning the unit on

1 Press SRC/OFF to turn the unit on.

Turning the unit off

1 Press SRC/OFF and hold until the unit turns off.

Selecting a source

1 Press SRC/OFF to cycle through the sources

listed below:

TUNER (tuner)—CD (built-in CD player)—AUX

(AUX)

Adjusting the volume

1 Turn SRC/OFF to adjust volume.

CAUTION

For safety reasons, park your vehicle when remov-

ing the front panel.

Note

When this unit's blue/white lead is connected to

the vehicle's auto-antenna relay control terminal,

the vehicle's antenna extends when this unit's

source is turned on. To retract the antenna, turn

the source off.

Menu operations identical

for function settings/audio

adjustments/initial settings

Returning to the ordinary display

Canceling the initial setting menu

! Press B (BAND/ESC).

You can also cancel initial settings by holding

down SRC/OFF until the unit turns off.

Tuner

Basic Operations

Selecting a band

1 Press B (BAND/ESC) until the desired band (F1,

F2, F3 for FM or AM) is displayed.

Manual tuning (step by step)

1 Press c or d.

Seeking

1 Press and hold c or d, and then release.

You can cancel seek tuning by briefly pressing c

or d.

While pressing and holding c or d, you can skip

stations. Seek tuning starts as soon as you re-

lease c or d.

Storing and recalling stations

for each band

% When you find a station that you want

to store in memory, press one of the preset

tuning buttons (1 to 6) and hold until the

preset number stops flashing.

Stored radio station frequency can be recalled

by pressing the preset tuning button.

# Press a or b to recall radio station frequen-

cies.

Operating this unit

Function settings

% Press FUNC to select the function.

After selecting, perform the following proce-

dures to set the function.

BSM (best stations memory)

BSM (best stations memory) automatically stores the

six strongest stations in the order of their signal

strength.

Storing broadcast frequencies with BSM may replace

broadcast frequencies you have saved using 1 to 6.

1 Press a to turn BSM on.

The six strongest broadcast frequencies are

stored in the order of their signal strength.

To cancel the storage process, press b.

LOCAL (local seek tuning)

Local seek tuning lets you tune in to only those radio

stations with sufficiently strong signals for good re-

ception.

1 Press a or b to turn local seek tuning on or off.

2 Press c or d to set the sensitivity.

FM: LOCAL 1—LOCAL 2—LOCAL 3—LOCAL 4

AM: LOCAL 1—LOCAL 2

The highest level setting allows reception of only

the strongest stations, while lower levels allow the

reception of weaker stations.

Basic Operations

Playing a CD/CD-R/CD-RW

1 Insert the disc into the disc loading slot with the

label side up.

Ejecting a CD/CD-R/CD-RW

1 Press h.

Selecting a folder

1 Press a or b.

Selecting a track

1 Press c or d.

Fast forwarding or reversing

1 Press and hold c or d.

When playing compressed audio, there is no

sound during fast forward or reverse.

Switching between compressed audio and CD-DA

1 Press B (BAND/ESC).

Displaying text information

Selecting the desired text information

1 Press D (DISP/SCRL).

Scrolling the text information to the left

1 Press and hold D (DISP/SCRL).

Notes

! Depending on the version of iTunes used to

write MP3 files to a disc or media file types, in-

compatible text stored within an audio file

may be displayed incorrectly.

! Text information items that can be changed

depend on the media.

Function settings

% Press FUNC to select the function.

After selecting, perform the following proce-

dures to set the function.

RPT (repeat play)

1 Press c or d to select the repeat range.

DSC – Repeat all tracks

TRK – Repeat the current track

FLD – Repeat the current folder

RDM (random play)

1 Press a or b to turn random play on or off.

When random play is on, RDM appears in the dis-

play.

If you turn random play on during folder repeat,

FRDM appears in the display.

SCAN (scan play)

Scan play searches for a song within the selected re-

peat range.

1 Press a to turn scan play on.

If you turn scan play on during FLD, FSCN ap-

pears in the display.

2 When you find the desired track press b to turn

scan play off.

If the display has automatically returned to the

playback display, select SCAN again by pressing

FUNC.

After scanning of a disc (folder) is finished, nor-

mal playback of the tracks begins.

PAUSE (pause)

1 Press a or b to pause or resume.

SRTRV (sound retriever)

Section