Pioneer DEH-141UB: DEH-140UB Kullanıcı El Kitabı - Sayfa 11

Araç Alıcısı Pioneer DEH-141UB: DEH-140UB için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Pioneer DEH-141UB: DEH-140UB 16 sayfaları. Cd rds receiver
Ayrıca Pioneer DEH-141UB: DEH-140UB için: Servis Kılavuzu (13 sayfalar)

Pioneer DEH-141UB: DEH-140UB Kullanıcı El Kitabı
Appendix
Additional information
Message
Cause
Action
NO AUDIO
The inserted
Replace the disc.
disc does not
contain any
playable files.
SKIPPED
The inserted
Replace the disc.
disc contains
DRM protected
files.
PROTECT
All the files on
Replace the disc.
the inserted
disc are em-
bedded with
DRM.
USB storage device
Message
Cause
Action
! Turn the plug
NO DEVICE
When plug and
play is off, no
and play on.
! Connect a com-
USB storage de-
vice is con-
patible USB stor-
nected.
age device.
FRMT READ
Sometimes
Wait until the
there is a delay
message disap-
between the
pears and you
start of playback
hear sound.
and when you
start to hear any
sound.
NO AUDIO
There are no
Transfer the audio
songs.
files to the USB
storage device
and connect.
The connected
Follow the USB
USB storage de-
storage device in-
vice has secur-
structions to dis-
ity enabled.
able the security.
10
En
Message
Cause
Action
SKIPPED
The connected
Play an audio file
USB storage de-
not embedded
vice contains
with Windows
files embedded
Media DRM 9/10.
with Windows
Mediaä DRM 9/
10.
PROTECT
All the files in
Transfer audio
the USB storage
files not em-
device are em-
bedded with
bedded with
Windows Media
Windows Media
DRM 9/10 to the
DRM 9/10.
USB storage de-
vice and connect.
! Connect a USB
N/A USB
The USB device
connected to is
Mass Storage
not supported
Class compliant
by this unit.
device.
! Disconnect
your device and
replace it with a
compatible USB
storage device.
CHECK USB
The USB con-
Check that the
nector or USB
USB connector or
cable has short-
USB cable is not
circuited.
caught in some-
thing or dam-
aged.
The connected
Disconnect the
USB storage de-
USB storage de-
vice consumes
vice and do not
more than
use it. Turn the
500 mA (maxi-
ignition switch to
mum allowable
OFF, then to ACC
current).
or ON and then
connect only
compliant USB
storage devices.
Autogood products «130»
Additional information
Message
Cause
Action
ERROR-19
Communication
Perform one of
failed.
the following op-
erations.
–Turn the ignition
switch OFF and
back ON.
–Disconnect the
USB storage de-
vice.
–Change to a dif-
ferent source.
Then, return to
the USB source.
ERROR-23
USB storage de-
USB storage de-
vice was not for-
vice should be for-
matted with
matted with
FAT16 or FAT32.
FAT16 or FAT32.

Handling guidelines

Discs and player
Use only discs that feature either of the following
two logos.
Use only conventional, fully circular discs. Do not
use shaped discs.
Do not insert anything other than a CD into the
CD loading slot.
Do not use cracked, chipped, warped, or other-
wise damaged discs as they may damage the play-
er.
Unfinalized CD-R/RW discs cannot be played
back.
Do not touch the recorded surface of the discs.
Store discs in their cases when not in use.
Do not attach labels, write on or apply chemicals
to the surface of the discs.
To clean a CD, wipe the disc with a soft cloth out-
ward from the center.
Condensation may temporarily impair the player's
performance. Let it rest for about one hour to ad-
just to a warmer temperature. Also, wipe any
damp discs off with a soft cloth.
Playback of discs may not be possible because of
disc characteristics, disc format, recorded applica-
tion, playback environment, storage conditions,
and so on.
Road shocks may interrupt disc playback.
When using discs that can be printed on label sur-
faces, check the instructions and the warnings of
the discs. Depending on the discs, inserting and
ejecting may not be possible. Using such discs
may result in damage to this equipment.
Do not attach commercially available labels or
other materials to the discs.
! The discs may warp making the disc unplay-
able.
! The labels may come off during playback and
prevent ejection of the discs, which may result
in damage to the equipment.