Pioneer DEH-15 Kullanım Kılavuzu - Sayfa 24

Araç Alıcısı Pioneer DEH-15 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Pioneer DEH-15 28 sayfaları. Pioneer deh-15: install guide
Ayrıca Pioneer DEH-15 için: Kurulum Kılavuzu (6 sayfalar)

Sayfayı Yazdır

Installation

Note:

• Before finally installing the unit, connect the

wiring temporarily, making sure it is all connected

up properly, and the unit and the system work

properly.

• Use only the parts included with the unit to ensure

proper installation. The use of unauthorized parts

can cause malfunctions.

• Consult with your nearest dealer if installation

requires the drilling of holes or other modifications

of the vehicle.

• Install the unit where it does not get in the driver's

way and cannot injure the passenger if there is a

sudden stop, like an emergency stop.

•

The semiconductor laser will be damaged if it

overheats, so don't install the unit anywhere hot

— for instance, near a heater outlet.

DIN Front/Rear-mount

This unit can be properly installed either from "Front" (conventional DIN Front-mount) or

"Rear" (DIN Rear-mount installation, utilizing threaded screw holes at the sides of unit

chassis). For details, refer to the following illustrated installation methods.

DIN Front-mount

Installation with the rubber bush (Fig. 4)

Dashboard

182

• If installation angle exceeds 60° from horizontal,

the unit might not give its optimum performance.

(Fig. 3)

Holder

After inserting the holder into the dash-

board, then select the appropriate tabs

according to the thickness of the dash-

board material and bend them.

(Install as firmly as possible using the

top and bottom tabs. To secure, bend

the tabs 90 degrees.)

Rubber bush

Screw

Fig. 3

Fig. 4