Pioneer DEH-1700R Kullanım Kılavuzu - Sayfa 2

Araç Alıcısı Pioneer DEH-1700R için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Pioneer DEH-1700R 8 sayfaları. High power cd player with rds tuner

Sayfayı Yazdır

CRD3902-A/N -Page 2-

Power ON/OFF

Tuner

Turning the unit on and

Listening to the radio

selecting a source

You can select a source you want to listen to.

To switch to the built-in CD player, load a disc

in the unit (refer to Playing a CD).

% Press SOURCE to select a source.

Press SOURCE repeatedly to switch between

This units AF (alternative frequencies search)

the following sources:

function can be turned on and off. AF should

Built-in CD playerTuner

be off for normal tuning operation (refer to Se-

When you select a source the unit is turned

lecting alternative frequencies).

on.

1 Band indicator

Notes

Shows which band the radio is tuned to,

! When no disc has been set in the unit, the

MW, LW or FM.

source will not switch to the built-in CD player.

! When this units blue/white lead is connected

2 LOC indicator

to the vehicles auto-antenna relay control

Shows when local seek tuning is on.

terminal, the vehicles antenna extends when

this units source is turned on. To retract the

3 Stereo (5) indicator

antenna, turn the source off.

Shows that the frequency selected is being

broadcast in stereo.

4 Frequency indicator

Turning the unit off

Shows to which frequency the tuner is

tuned.

% Press SOURCE and hold until the unit

turns off.

5 Preset number indicator

Shows which preset has been selected.

Press SOURCE to select the tuner.

Use VOLUME to adjust the sound level.

Press BAND to select a band.

Press BAND until the desired band is dis-

played, F1, F2 for FM or MW/LW.

To perform manual tuning, briefly press

c or d.

To perform seek tuning, press and hold

% Press LOCAL/BSM repeatedly to turn

c or d for about one second and release.

local seek tuning on or off.

The tuner will scan the frequencies until a

When local seek tuning is on, LOC appears in

broadcast strong enough for good reception is

the display.

found.

# You can cancel seek tuning by briefly pressing

either c or d.

Storing the strongest

# If you press and hold c or d you can skip sta-

tions. Seek tuning starts as soon as you release

broadcast frequencies

the button.

BSM (best stations memory) lets you automa-

tically store the six strongest broadcast fre-

quencies under preset tuning buttons 16 and

Storing and recalling

once stored there you can tune in to those fre-

quencies with the touch of a button.

broadcast frequencies

! Storing broadcast frequencies with BSM

If you press any of the preset tuning buttons

may replace broadcast frequencies you

16 you can easily store up to six broadcast

have saved using buttons 16.

frequencies for later recall with the touch of a

button.

% Press LOCAL/BSM and hold until the

! Up to 12 FM stations, 6 for each of the two

BSM turns on.

FM bands, and 6 MW/LW stations can be

BSM begins to flash. While BSM is flashing

stored in memory.

the six strongest broadcast frequencies will be

stored under preset tuning buttons 16 in the

% When you find a frequency that you

order of their signal strength. When finished,

want to store in memory press one of pre-

BSM stops flashing.

set tuning buttons 16 and hold until the

# To cancel the storage process, press

preset number stops flashing.

LOCAL/BSM.

The number you have pressed will flash in the

preset number indicator and then remain lit.

The selected radio station frequency has been

stored in memory.

The next time you press the same preset tun-

ing button the radio station frequency is re-

called from memory.

Tuning in strong signals

Local seek tuning lets you tune in only those

radio stations with sufficiently strong signals

for good reception.

RDS

Introduction of RDS operation

% Press BTB and hold until the display

switches.

Press BTB and hold repeatedly to switch be-

tween the following settings:

Program service namePTY information

Frequency

PTY (program type ID code) information is

listed on PTY list.

# PTY information and the frequency of the cur-

RDS (radio data system) is a system for provid-

rent station appears on the display for eight sec-

ing information along with FM broadcasts.

onds.

This inaudible information provides such fea-

tures as program service name, program type,

traffic announcement standby and automatic

tuning, intended to aid radio listeners in find-

Receiving PTY alarm

ing and is tuning in to a desired station.

broadcasts

! RDS service may not be provided by all sta-

tions.

PTY alarm is a special PTY code for announce-

! RDS functions such as AF and TA are only

ments regarding emergencies such as natural

active when your radio is tuned to an RDS

disasters. When the tuner receives the radio

station.

alarm code, ALARM appears on the display

and the volume adjusts to the TA volume.

1 Program service name

When the station stops broadcasting the

Shows the name of broadcast program.

emergency announcement, the system re-

turns to the previous source.

2 AF indicator

! An emergency announcement can be can-

Shows when AF (alternative frequencies

celled by pressing TA.

search) function is on.

3 TA indicator

Shows when TA (traffic announcement

Selecting alternative

standby) function is on.

frequencies

4 TP indicator

If you are listening to a broadcast and the re-

Shows when a TP station is tuned in.

ception becomes weak or there are other pro-

blems, the unit will automatically search for a

different station in the same network which is

broadcasting a stronger signal.

Switching the RDS display

! AF is on as a default.

When you tune in an RDS station its program

% Press TA and hold repeatedly to turn AF

service name is displayed. If you want to know

on or off.

the frequency you can.

When AF is on, AF appears in the display.

Limiting stations to regional

Notes

programming

! Only RDS stations are tuned in during seek

When AF is used to automatically retune fre-

tuning or BSM when AF is on.

quencies, the regional function limits the se-

! When you recall a preset station, the tuner

lection to stations broadcasting regional

may update the preset station with a new fre-

programs.

quency from the stations AF list. (This is only

available when using presets on the F1 band.)

% Press BAND and hold until the regional

No preset number appears on the display if

function turns on or off.

the RDS data for the station received differs

from that for the originally stored station.

! Sound may be temporarily interrupted by an-

Notes

other program during an AF frequency

! Regional programming and regional networks

search.

are organized differently depending on the

! When the tuner is tuned to a non-RDS station

country (i.e., they may change according to

the AF indicator flashes.

the hour, state or broadcast area).

! AF can be turned on or off independently for

! The preset number may disappear on the dis-

each FM band.

play if the tuner tunes in a regional station

which differs from the originally set station.

! The regional function can be turned on or off

Using PI Seek

independently for each FM band.

If the unit fails to find a suitable alternative fre-

quency, or if you are listening to a broadcast

and the reception becomes weak, the unit will

automatically search for a different station

Receiving traffic

with the same programming. During the

announcements

search, PI SEEK is displayed and the output is

muted. The muting is discontinued after com-

TA (traffic announcement standby) lets you re-

pletion of the PI Seek, whether or not a differ-

ceive traffic announcements automatically, no

ent station is found.

matter what source you are listening to. TA

can be activated for both a TP station (a sta-

tion that broadcasts traffic information) or an

Using Auto PI Seek for preset

enhanced other networks TP station (a station

stations

carrying information which cross-references

TP stations).

When preset stations cannot be recalled, as

when travelling long distances, the unit can

Tune in a TP or enhanced other net-

be set to perform PI Seek during preset recall.

works TP station.

! The default setting for Auto PI Seek is off.

When you are tuned into a TP or enhanced

See Switching Auto PI Seek.

other networks TP station the TP indicator will

light.