Pioneer DEH-3200UB Kullanım Kılavuzu - Sayfa 10

Araç Alıcısı Pioneer DEH-3200UB için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Pioneer DEH-3200UB 28 sayfaları. Cd rds receiver
Ayrıca Pioneer DEH-3200UB için: Kurulum Kılavuzu (6 sayfalar), Kullanım Kılavuzu (31 sayfalar), Kullanım Kılavuzu (29 sayfalar), Kurulum Kılavuzu (8 sayfalar)

Sayfayı Yazdır

Operating this unit

Storing and recalling stations

You can easily store up to six stations for each band as presets.

Using preset tuning buttons

1. When you find a station that you want to store in memory, press one of the

preset tuning buttons (1 to 6) and hold until the preset number stops flashing.

2. Press one of the preset tuning buttons (1 to 6) to select the desired station.

Using preset screen

1. Press

to switch to the preset screen.

2. Use M.C. to store the selected frequency in memory.

Turn to change the preset number. Press and hold to store.

3. Use M.C. to select the desired station.

Turn to change the station. Press to select.

Note

• You can also recall stored radio stations by pushing M.C. up or down during the frequency

display.

Switching the RDS display

RDS (radio data system) contains digital information that helps search for the radio

stations.

1. Press

/DISP/SCRL.

Program service name – PTY information – Frequency

• PTY information and the frequency appear on the display for eight seconds.

Advanced operations using special buttons

Receiving traffic announcements

TA (traffic announcement standby) lets you receive traffic announcements

automatically, regardless of the source you are listening to.

1. Tune in a TP or enhanced other network's TP station.

2. Press TA/NEWS to turn traffic announcement standby on or off.

3. Use M.C. to adjust the TA volume when a traffic announcement begins.

The newly set volume is stored in memory and recalled for subsequent traffic

announcements.

4. Press TA/NEWS while a traffic announcement is being received to cancel the

announcement.

The tuner returns to the original source but remains in the standby mode until TA/

NEWS is pressed again.

Using news program interruption

When a news program is broadcast from a PTY code news station, the unit

automatically switches to the news broadcast station. When the news program ends,

reception of the previous program resumes.

* Press TA/NEWS and hold to turn on or off news program interruption.

A news program can be canceled by pressing TA/NEWS.

Function settings

1. Press M.C. to display the main menu.

2. Turn M.C. to change the menu option and press to select FUNCTION.

3. Turn M.C. to select the function.

After selecting, perform the following procedures to set the function.

BSM (best stations memory)

BSM (best stations memory) automatically stores the six strongest stations in the order

of their signal strength.

* Press M.C. to turn BSM on.

To cancel, press M.C. again.

Regional (regional)

When AF is used, the regional function limits the selection of stations broadcasting

regional programs.

* Press M.C. to turn the regional function on or off.