Pioneer DEH-4090MP Kullanıcı El Kitabı - Sayfa 9

Araç Alıcısı Pioneer DEH-4090MP için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Pioneer DEH-4090MP 34 sayfaları.

Sayfayı Yazdır

Operating this unit

Basic Operations

Power ON/OFF

Turning the unit on

% Press SRC to turn the unit on.

Turning the unit off

% Press OFF and hold until the unit turns

off.

Selecting a source

You can select a source you want to listen to.

To switch to the built-in CD player, load a disc

in the unit (refer to page 11).

% Press SRC repeatedly to switch be-

tween the following sources.

TUNER (tuner)—COMPACT DISC (built-in CD

player)—AUX (AUX)

Notes

! In the following cases, the sound source will

not change.

— When there is no disc in the unit.

— When AUX (auxiliary input) is set to off

(refer to page 20).

! AUX is set to on by default. Turn off the AUX

when not in use (refer to Switching the auxili-

ary setting on page 20).

! Charging the portable audio player using

car's DC power source while connecting it to

AUX input may generate noise. In this case,

stop charging.

! When this unit's blue/white lead is connected

to the vehicle's auto-antenna relay control

terminal, the vehicle's antenna extends when

this unit's source is turned on. To retract the

antenna, turn the source off.

Adjusting the volume

% Use MULTI-CONTROL to adjust the

sound level.

Tuner

Basic Operations

% Select a band

Press BAND/ESC.

# Band can be selected from among FM1, FM2,

FM3 or AM.

% Manual tuning (step by step)

Push MULTI-CONTROL left or right.

% Seek tuning

Push and hold MULTI-CONTROL left or right

for about one second and release.

# You can cancel seek tuning by pushing

MULTI-CONTROL left or right.

# If you push and hold MULTI-CONTROL left or

right, you can skip stations. Seek tuning starts as

soon as you release MULTI-CONTROL.

Storing and recalling broadcast

frequencies

You can easily store up to six broadcast fre-

quencies for later recall.

! Six stations for each band can be stored in

memory.

Press LIST.

Preset screen is displayed.

Use MULTI-CONTROL to store the se-

lected frequency in memory.

Turn to change the preset number. Press and

hold to store.

# You can also store the frequency in memory

by pushing and holding MULTI-CONTROL right.

Use MULTI-CONTROL to select the de-

sired station.

Turn to change the station. Press to select.

# You can also change the station by pushing

MULTI-CONTROL up or down.

# To return to the ordinary display, press

BAND/ESC or LIST.

# If you do not operate the list within about 30

seconds, the display automatically returns to the

ordinary display.

Section