Pioneer DEH-4200SD Kullanım Kılavuzu - Sayfa 10

Araç Alıcısı Pioneer DEH-4200SD için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Pioneer DEH-4200SD 29 sayfaları. Cd rds receiver
Ayrıca Pioneer DEH-4200SD için: Kullanım Kılavuzu (28 sayfalar), Kurulum Kılavuzu (8 sayfalar)

Sayfayı Yazdır

1. Connections

Operating this unit

Turning the unit on

* Press SRC/OFF to turn the unit on.

Turning the unit off

* Press SRC/OFF and hold until the unit turns off.

Selecting a source

* Press SRC/OFF to cycle between:

DEH-4200SD

TUNER (tuner) – CD (built-in CD player) – USB (USB)/USB-iPod (iPod) – SD (SD

memory card) – AUX (AUX)

DEH-3200UB

TUNER (tuner) – CD (built-in CD player) – USB (USB)/USB-iPod (iPod) – AUX (AUX)

Adjusting the volume

* Turn M.C. to adjust volume.

Note

• When this unit's blue/white lead is connected to the vehicle's auto-antenna relay control

terminal, the vehicle's antenna extends when this unit's source is turned on. To retract the

antenna, turn the source off.

Menu operations identical for function settings/audio

adjustments/initial settings/lists

Returning to the previous display

Returning to the previous list/category (the folder/category one level higher)

* Press

/DISP/SCRL.

Returning to the main menu

Returning to the top tier of list/category

* Press and hold

/DISP/SCRL.

Returning to the ordinary display

Canceling the initial setting menu

Returning to the ordinary display from the list/category

* Press BAND/ESC.

Tuner

Basic Operations

Selecting a band

* Press BAND/ESC until the desired band (FM1, FM2, FM3 for FM or MW/LW) is

Manual tuning (step by step)

* Push M.C. left or right.

Seeking

* Push and hold M.C. left or right, and then release.

Using PI Seek

Using Auto PI Seek for preset stations

Autogood products internet store http://130.com.ua

displayed.

You can cancel seek tuning by pushing M.C. left or right.

While pushing and holding M.C. left or right, you can skip stations. Seek tuning starts

as soon as you release M.C.

Note

• This unit's AF (alternative frequencies search) function can be turned on and off. AF should

be off for normal tuning operation (refer to page 11).

If the tuner cannot find a suitable station, or reception status deteriorates, the unit

automatically searches for a different station with the same programming. During the

search, PI seek is displayed and sound is muted.

When preset stations cannot be recalled, the unit can be set to perform PI Seek during

preset recall.

• The default setting for Auto PI Seek is off. Refer to "Auto PI (auto PI seek)" on page

18.