Pioneer DEH-4500BT Kullanım Kılavuzu - Sayfa 13

Araç Alıcısı Pioneer DEH-4500BT için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Pioneer DEH-4500BT 33 sayfaları. Cd rds receiver
Ayrıca Pioneer DEH-4500BT için: Hızlı Başlangıç Kılavuzu (8 sayfalar)

Sayfayı Yazdır

Operating this unit

Connection menu operation

Important

! Be sure to park your vehicle in a safe place

and apply the parking brake when performing

this operation.

! Connected devices may not operate properly if

more than one Bluetooth device is connected

at a time (e.g. a phone and a separate audio

player are connected simultaneously).

Press and hold

nection menu.

# You cannot operate this step during a call.

Turn M.C. to select the function.

Once selected, the following functions can be

adjusted.

DEVICELIST (connecting or disconnecting a device

from the device list)

! When no device is selected in the device list, this

function is not available.

1 Press M.C. to display the setting mode.

2 Turn M.C. to select the name of a device you want

to connect/disconnect.

! Press and hold M.C. to switch the Bluetooth

device address and device name.

3 Press M.C. to connect/disconnect the selected de-

vice.

If the connection is established, * is indicated on

the device name.

DEL DEVICE (deleting a device from the device list)

! When no device is selected in the device list, this

function is not available.

1 Press M.C. to display the setting mode.

2 Turn M.C. to select the name of a device you want

to delete.

! Press and hold M.C. to switch the Bluetooth

device address and device name.

3 Press M.C. to display DELETE YES.

4 Press M.C. to delete a device information from

the device list.

! While this function is in use, do not turn off the

engine.

ADD DEVICE (connecting a new device)

to display the con-

1 Press M.C. to start searching.

! To cancel, press M.C. while searching.

! If this unit fails to find any available cellular

phones, NOT FOUND is displayed.

2 Turn M.C. to select a device from the device list.

! If the desired device is not displayed, select

RE-SEARCH.

! Press and hold M.C. to switch the Bluetooth

device address and device name.

3 Press M.C. to connect the selected device.

! To complete the connection, check the device

name (Pioneer BT Unit) and enter the PIN

code on your device.

! PIN code is set to 0000 as the default. You

can change this code.

! 6-digit number appears on the display of this

unit. Once the connection is established, this

number disappears.

! If you are unable to complete the connection

using this unit, use the device to connect to

the unit.

! If three devices are already paired, DEVICE-

FULL is displayed and it is not possible to per-

form this operation. In this case, delete a

paired device first.

A. CONN (connecting to a Bluetooth device automati-

cally)

1 Press M.C. to turn automatic connection on or

off.

VISIBLE (setting the visibility of this unit)

To check the availability of this unit from other de-

vices, Bluetooth visibility of this unit can be turned

on.

1 Press M.C. to turn the visibility of this unit on or

off.

PIN CODE (PIN code input)

To connect your device to this unit via Bluetooth wire-

less technology, you need to enter a PIN code on your

device to verify the connection. The default code is

0000, but you can change it with this function.

1 Press M.C. to display the setting mode.

2 Turn M.C. to select a number.

3 Press M.C. to move the cursor to the next posi-

tion.

4 After inputting PIN code, press and hold M.C.

! After inputting, pressing M.C. returns you to

the PIN code input display, and you can

change the PIN code.

Section