Pioneer DEH-4800BT Kullanım Kılavuzu - Sayfa 8

Araç Alıcısı Pioneer DEH-4800BT için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Pioneer DEH-4800BT 20 sayfaları. Cd rds receiver
Ayrıca Pioneer DEH-4800BT için: Kurulum Kılavuzu (33 sayfalar), Hızlı Başlangıç Kılavuzu (33 sayfalar)

Sayfayı Yazdır

Bluetooth

Bluetooth connection

Important

If three or more Bluetooth devices (e.g. a phone and separate audio player) are connected, they may

not work properly.

Turn on the Bluetooth function of the device.

Press

to display the phone menu.

Turn the M.C. dial to select [BT SETTING], then press to confirm.

Turn the M.C. dial to select [ADD DEVICE], then press to confirm.

The unit starts to search for available devices, then displays them in the device list.

• To cancel searching, press the M.C. dial.

• If the desired device is not in the list, select [RE-SEARCH].

• If there is no device available, [NOT FOUND] appears in the display.

Turn the M.C. dial to select a device from the device list, then press to confirm.

Press and hold the M.C. dial to switch the displayed device information between the

Bluetooth device address and device name.

Select [Pioneer BT Unit] shown in the device display.

Make sure the same 6-digit number appears on this unit and the device, then

select "Yes" on the device.

NOTES

• [DEVICE FULL] appears if the unit has already been paired with three other devices. In this case, delete

one of the paired devices. See [DEL DEVICE] or [GUEST MODE] in the Bluetooth settings (page 8).

• Depending on the device, the PIN code is required in step 7. In this case, input [0000].

TIP

The Bluetooth connection can be also made by detecting the unit from the Bluetooth device. To do so,

[VISIBLE] in the Bluetooth settings needs to be set to [ON]. For details on a Bluetooth device operations,

refer to the operating instructions supplied with the Bluetooth device.

Bluetooth settings

Menu Item

Description

DEVICELIST

Display the list of paired Bluetooth devices. "*" appears on the

device name when the Bluetooth connection is established.

Menu Item

Description

DEL DEVICE

Delete the device information.

[DELETE YES],

[DELETE NO]

ADD DEVICE

A.CONN

Select [ON] to connect to a Bluetooth device automatically.

[ON], [OFF]

VISIBLE

Select [ON] so that a Bluetooth device can detect the unit when

the unit is connected via Bluetooth to another device.

[ON], [OFF]

PIN CODE

Change the PIN code.

1 Press the M.C. dial to display the setting mode.

2 Turn the M.C. dial to select a number.

3 Press the M.C. dial to move the cursor to the next position.

4 After inputting the PIN code, press and hold the M.C. dial.

After inputting the PIN code, pressing the M.C. dial returns you

to the PIN code input display, and you can change the PIN code.

DEV. INFO

Switch the device information on the display between the

device name and Bluetooth device address.

GUEST MODE

Select [ON] to move to the [DEL DEVICE] screen automatically

when the unit has already been paired with three devices.

[ON], [OFF]

A.PAIRING

Select [ON] to pair the unit and iPhone automatically when an

iPhone is connected to the unit via USB. (This function may not

[ON], [OFF]

be available depending on the version of iOS you are using.)

Bluetooth telephone

First, make a Bluetooth connection with the Bluetooth telephone (page 8). Up to two

Bluetooth telephones can be connected simultaneously.

Important

• Leaving the unit on standby to connect to your phone via Bluetooth while the engine is not running

can drain the vehicle's battery.

• Be sure to park your vehicle in a safe place and apply the parking brake before operation.

To make a phone call

Press

to display the phone menu.

When two phones are connected, a phone name appears first then a phone menu

will display. To switch to another phone, press

again.