Pioneer DEH-6400BT Kullanım Kılavuzu - Sayfa 15

Araç Alıcısı Pioneer DEH-6400BT için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Pioneer DEH-6400BT 36 sayfaları. Cd rds receiver
Ayrıca Pioneer DEH-6400BT için: Kullanıcı El Kitabı (25 sayfalar), Hızlı Başlangıç Kılavuzu (8 sayfalar)

Sayfayı Yazdır

Operating this unit

! The following functions are still accessible

from the unit even if the control mode is set to

iPod/APP.

— Pausing

— Fast forward/reverse

— Track up/down

! When the control mode is set to iPod/APP,

only Pause or Sound Retriever is available.

! The browse function cannot be operated from

this unit.

Audio adjustments

1 Audio display

Shows the audio adjustment status.

Press M.C. to display the main menu.

Turn M.C. to change the menu option

and press to select AUDIO.

Turn M.C. to select the audio function.

After selecting, perform the following proce-

dures to set the audio function.

Fader/Balance (fader/balance adjustment)

1 Press M.C. to display the setting mode.

2 Press M.C. to cycle between fader (front/rear) and

balance (left/right).

3 Turn M.C. to adjust the front/rear speaker bal-

ance.

! The front/rear speaker balance cannot be ad-

justed when the rear output setting is Rear

SP :S/W. Refer to S/W control (rear output

and subwoofer setting) on page 21.

4 Turn M.C. to adjust the left/right speaker balance.

Preset EQ (equalizer recall)

1 Press M.C. to display the setting mode.

2 Turn M.C. to select an equalizer curve.

Powerful—Natural—Vocal—Custom1—Cus-

tom2—Flat—Super bass

G.EQ (equalizer adjustment)

You can adjust the currently selected equalizer curve

setting as desired. Adjusted equalizer curve settings

are stored in Custom1 or Custom2.

! A separate Custom1 curve can be created for

each source. If you make adjustments when a

curve other than Custom2 is selected, the equali-

zer curve settings will be stored in Custom1.

! A Custom2 curve that is common for all sources

can be created. If you make adjustments when

the Custom2 curve is selected, the Custom2

curve will be updated.

1 Recall the equalizer curve you want to adjust.

2 Press M.C. to display the setting mode.

3 Press M.C. to cycle between equalizer band and

level.

4 Turn M.C. to select the equalizer band to adjust.

100Hz—315Hz—1.25kHz—3.15kHz—8kHz

Turn M.C. to adjust the equalizer curve.

+6 to –6 is displayed as the equalizer curve is in-

creased or decreased.

Loudness (loudness)

Loudness compensates for deficiencies in the low-fre-

quency and high-frequency ranges at low volume.

1 Press M.C. to display the setting mode.

2 Press M.C. to turn loudness on or off.

3 Turn M.C. to select the desired setting.

Low (low)—Mid (mid)—High (high)

Subwoofer1 (subwoofer on/off setting)

This unit is equipped with a subwoofer output which

can be turned on or off.

1 Press M.C. to display the setting mode.

2 Press M.C. to turn subwoofer output on or off.

3 Turn M.C. to select the phase for the subwoofer

output.

Turn M.C. to the left to select reverse phase, and

Reverse appears in the display. Turn M.C. to the

right to select normal phase, and Normal appears

in the display.

Subwoofer2 (subwoofer adjustment)

Section