Pioneer DEH-7300BT Kullanıcı El Kitabı - Sayfa 16

Araç Alıcısı Pioneer DEH-7300BT için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Pioneer DEH-7300BT 23 sayfaları. Cd rds receiver
Ayrıca Pioneer DEH-7300BT için: Kullanım Kılavuzu (29 sayfalar), Kurulum Kılavuzu (29 sayfalar)

Pioneer DEH-7300BT Kullanıcı El Kitabı
Appendix
Additional Information
Message
Cause
Action
CHECK USB
The USB con-
Check that the
nector or USB
USB connector or
cable has short-
USB cable is not
circuited.
caught in some-
thing or dam-
aged.
The connected
Disconnect the
USB storage de-
USB storage de-
vice consumes
vice and do not
more than 500
use it. Turn the
mA (maximum
ignition switch to
allowable cur-
OFF, then to ACC
rent).
or ON and then
connect only
compliant USB
storage devices.
The iPod oper-
Make sure the
ates correctly
connection cable
but does not
for the iPod has
charge
not shorted out
(e.g., not caught
in metal objects).
After checking,
turn the ignition
switch OFF and
back ON, or dis-
connect the iPod
and reconnect.
16
En
Message
Cause
Action
! Perform one of
ERROR-19
Communication
failed.
the following op-
erations.
–Turn the ignition
switch OFF and
back ON.
–Disconnect the
USB storage de-
vice.
–Change to a dif-
ferent source.
Then, return to
the USB source.
! Disconnect the
cable from the
iPod. Once the
iPod's main menu
is displayed, re-
connect the iPod
and reset it.
iPod failure
Disconnect the
cable from the
iPod. Once the
iPod's main menu
is displayed, re-
connect the iPod
and reset it.
ERROR-23
USB storage de-
USB storage de-
vice was not for-
vice should be for-
matted with
matted with
FAT12, FAT16 or
FAT12, FAT16 or
FAT32
FAT32.
Additional Information
Message
Cause
Action
ERROR-16
The iPod firm-
Update the iPod
ware version is
version.
old
iPod failure
Disconnect the
cable from the
iPod. Once the
iPod's main menu
is displayed, re-
connect the iPod
and reset it.
STOP
There are no
Select a list that
songs in the
contains songs.
current list.
NOT FOUND
No related
Transfer songs to
songs
the iPod.
Bluetooth Telephone
Message
Cause
Action
ERROR-10
The power failed
Turn the ignition
for the Blue-
switch OFF and
tooth module of
then to ACC or
this unit.
ON.
If the error mes-
sage is still dis-
played after
performing the
above action,
please contact
your dealer or an
authorized
Pioneer Service
Station.

Handling guidelines

Discs and player
Use only discs that feature either of the following
two logos.
Use 12-cm discs. Do not use 8-cm discs or an
adapter for 8-cm discs.
Use only conventional, fully circular discs. Do not
use shaped discs.
Do not insert anything other than a CD into the
CD loading slot.
Do not use cracked, chipped, warped, or other-
wise damaged discs as they may damage the play-
er.
Unfinalized CD-R/CD-RW discs cannot be played
back.
Do not touch the recorded surface of the discs.
Store discs in their cases when not in use.
Do not attach labels, write on or apply chemicals
to the surface of the discs.
To clean a CD, wipe the disc with a soft cloth out-
ward from the center.
Condensation may temporarily impair the player's
performance. Let it rest for about one hour to ad-
just to a warmer temperature. Also, wipe any
damp discs off with a soft cloth.