Pioneer DEH-7300BT Kurulum Kılavuzu - Sayfa 2

Araç Alıcısı Pioneer DEH-7300BT için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Pioneer DEH-7300BT 29 sayfaları. Cd rds receiver
Ayrıca Pioneer DEH-7300BT için: Kullanım Kılavuzu (29 sayfalar), Kullanıcı El Kitabı (23 sayfalar)

Sayfayı Yazdır

1. Installation

Section

Installation

Important

! Check all connections and systems before

final installation.

! Do not use unauthorized parts as this may

cause malfunctions.

! Consult your dealer if installation requires dril-

ling of holes or other modifications to the vehi-

cle.

! Do not install this unit where:

— it may interfere with operation of the vehi-

cle.

— it may cause injury to a passenger as a re-

sult of a sudden stop.

! The semiconductor laser will be damaged if it

overheats. Install this unit away from hot

places such as near the heater outlet.

! Optimum performance is obtained when the

unit is installed at an angle of less than 60°.

60°

DIN front/rear mount

This unit can be properly installed using either

front-mount or rear-mount installation.

Use commercially available parts when instal-

ling.

DIN Front-mount

Insert the mounting sleeve into the

dashboard.

For installation in shallow spaces, use the sup-

plied mounting sleeve. If there is enough

space, use the mounting sleeve that came

with the vehicle.

Secure the mounting sleeve by using a

screwdriver to bend the metal tabs (90°)

into place.

1 Dashboard

2 Mounting sleeve

Install the unit as illustrated.

1 Nut

2 Firewall or metal support

3 Metal strap

4 Screw

5 Screw (M4 × 8)

# Make sure that the unit is installed securely in

place. An unstable installation may cause skip-

ping or other malfunctions.

DIN Rear-mount

Determine the appropriate position

where the holes on the bracket and the

side of the unit match.

Installation

Tighten two screws on each side.

1 Tapping screw (5 mm × 8 mm)

2 Mounting bracket

3 Dashboard or console

Removing the unit

Remove the trim ring.

1 Trim ring

2 Notched tab

! Releasing the front panel allows easier ac-

cess to the trim ring.

! When reattaching the trim ring, point the

side with the notched tab down.

Insert the supplied extraction keys into

both sides of the unit until they click into

place.

Pull the unit out of the dashboard.

Removing and re-attaching the

front panel

You can remove the front panel to protect your

unit from theft.

Press the detach button and push the front

panel upward and pull it toward you.

For details, refer to operation manual.

Section