Pioneer MVH-X285FD Servis Kılavuzu - Sayfa 9

Araç Alıcısı Pioneer MVH-X285FD için çevrimiçi göz atın veya pdf Servis Kılavuzu indirin. Pioneer MVH-X285FD 44 sayfaları. Rds media center receiver

Sayfayı Yazdır

5.2 ERROR CODE LIST

Common

AMP ERROR

This unit fails to operate or the speaker

connection is incorrect; the protection

circuit is activated.

– Check the speaker connection.

– Check the power IC and its peripheral circuit.

NO XXXX (NO TITLE, for example)

There is no embedded text information.

– Switch the display or play another

track/file.

USB device/iPod

FORMAT READ

Sometimes there is a delay between the

start of playback and when you start to

hear any sound.

– Wait until the message disappears and

you hear sound.

NO AUDIO

There are no songs.

– Transfer the audio files to the USB

device and connect.

The connected USB device has security

enabled.

– Follow the USB device instructions to

disable the security.

SKIPPED

The connected USB device contains

DRM protected files.

– The protected files are skipped.

PROTECT

All the files on the connected USB

device are embedded with DRM.

– Replace the USB device.

N/A USB

The connected USB device is not

supported by this unit.

– Disconnect your device and replace it

with a compatible USB device.

HUB ERROR

The USB device connected via a USB

hub is not supported by this unit.

– Connect the USB device directly to this

unit using a USB cable.

CHECK USB

The USB connector or USB cable has

short-circuited.

– Check that the USB connector or USB

The connected USB device consumes

more than maximum allowable current.

– Disconnect the USB device and do not

The iPod operates correctly but does

not charge.

– Make sure the connection cable for

ERROR-19

Communication failed.

– Perform one of the following

• Turn the ignition switch OFF and

• Disconnect the USB device.

• Change to a different source.

iPod failure.

–Disconnect the cable from the iPod.

ERROR-23

USB device was not formatted properly.

– Format the USB device with FAT12,

ERROR-16

The iPod firmware version is old.

– Update the iPod version.

iPod failure.

– Disconnect the cable from the iPod.

STOP

There are no songs in the current list.

– Select a list that contains songs.

NOT FOUND

No related songs.

– Transfer songs to the iPod.

MVH-280FD/XNEW5

cable is not caught in something or

damaged.

use it. Turn the ignition switch OFF

and back to ACC or ON. Connect only

compliant USB devices.

the iPod has not shorted out (e.g., not

caught in metal objects). After

checking, turn the ignition switch OFF

and back to ON, or disconnect the

iPod and reconnect.

operations, then return to the USB

source.

back to ON.

Once the iPod's main menu is

displayed, reconnect the iPod and

reset it.

FAT16 or FAT32.

Once the iPod's main menu is

displayed, reconnect the iPod and

reset it.