Pioneer MVH-X360BT Kullanıcı El Kitabı - Sayfa 13

Araç Alıcısı Pioneer MVH-X360BT için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Pioneer MVH-X360BT 26 sayfaları.
Ayrıca Pioneer MVH-X360BT için: Servis Kılavuzu (46 sayfalar)

Sayfayı Yazdır

Using this unit

1 Press M.C. to display the setting mode.

2 Turn M.C. to select the equalizer.

POWERFUL—NATURAL—VOCAL—CUS-

TOM1—CUSTOM2—FLAT—SUPER BASS

The equalizer band and equalizer level can be

customized when CUSTOM1 or CUSTOM2 is

selected.

If selecting CUSTOM1 or CUSTOM2, complete

the procedures outlined below. If selecting

other options, press M.C. to return to the pre-

vious display.

! CUSTOM1 can be set separately for each

source. However, each of the below combi-

nations are set to the same setting auto-

matically.

! USB, iPod, PANDORA (iPhone), and

APP (iPhone)

! BT AUDIO, PANDORA (smartphone),

and APP (smartphone)

! CUSTOM2 is a shared setting used in com-

mon for all sources.

3 Press M.C. to display the setting mode.

4 Press M.C. to cycle between the following:

Equalizer band—Equalizer level

5 Turn M.C. to select the desired setting.

Equalizer band: 80HZ—250HZ—800HZ—

2.5KHZ—8KHZ

Equalizer level: +6 to –6

LOUDNESS (loudness)

Loudness compensates for deficiencies in the low-

frequency and high-frequency ranges at low vol-

ume.

1 Press M.C. to select the desired setting.

OFF (off)—LOW (low)—MID (mid)—HI (high)

SUB.W (subwoofer on/off setting)

This unit is equipped with a subwoofer output

which can be turned on or off.

1 Press M.C. to select the desired setting.

NOR (normal phase)—REV (reverse phase)—

OFF (subwoofer off)

SUB.W CTRL (subwoofer adjustment)

Only frequencies lower than those in the selected

range are outputted from the subwoofer.

1 Press M.C. to display the setting mode.

2 Press M.C. to cycle between the following:

Cut-off frequency—Output level—Slope level

Rates that can be adjusted will flash.

3 Turn M.C. to select the desired setting.

Cut-off frequency: 50HZ—63HZ—80HZ—

100HZ—125HZ—160HZ—200HZ

Output level: –24 to +6

Slope level: –12— –24

BASS BOOST (bass boost)

1 Press M.C. to display the setting mode.

2 Turn M.C. to select a desired level.

0 to +6 is displayed as the level is increased or

decreased.

HPF SETTING (high pass filter adjustment)

Use this function when wanting to listen only to

high-frequency sounds. Only frequencies higher

than the high-pass filter (HPF) cutoff are output

from the speakers.

1 Press M.C. to display the setting mode.

2 Press M.C. to cycle between the following:

Cut-off frequency—Slope level

3 Turn M.C. to select the desired setting.

Cut-off frequency: OFF—50HZ—63HZ—80HZ

—100HZ—125HZ—160HZ—200HZ

Slope level: –12— –24

Using this unit

SLA (source level adjustment)

This function prevents the volume from changing

too dramatically when the source switches.

! Settings are based on the FM volume level,

which remains unchanged.

! The AM volume level can also be adjusted with

this function.

! Each of the below combinations are set to the

same setting automatically.

! USB, iPod, PANDORA (iPhone), and APP

(iPhone)

! BT AUDIO, PANDORA (smartphone), and

APP (smartphone)

1 Press M.C. to display the setting mode.

2 Turn M.C. to adjust the source volume.

Adjustment range: +4 to –4

System menu

Press M.C. to display the main menu.

Turn M.C. to change the menu option

and press to select SYSTEM.

Turn M.C. to select the system menu

function.

Once selected, the following system menu func-

tions can be adjusted.

CLOCK SET (setting the clock)

1 Press M.C. to display the setting mode.

2 Press M.C. to select the segment of the clock

display you wish to set.

Hour—Minute

3 Turn M.C. to adjust the clock.

12H/24H (time notation)

1 Press M.C. to select the desired setting.

12H (12-hour clock)—24H (24-hour clock)

AUX (auxiliary input)

Black plate (13,1)

Activate this setting when using an auxiliary de-

vice connected to this unit.

1 Press M.C. to turn AUX on or off.

DIMMER (dimmer)

1 Press M.C. to turn the dimmer on or off.

! You can also change the dimmer setting by

pressing and holding

/DIMMER.

BT AUDIO (Bluetooth audio activation)

You need to activate the BT AUDIO source in order

to use a Bluetooth audio player.

1 Press M.C. to turn the BT AUDIO source on or

off.

BT MEM CLEAR (clearing the Bluetooth device

data stored on this unit)

Bluetooth device data stored on this unit can be

cleared. To protect your personal information,

clear the device memory before you pass the unit

on to someone else. The following information will

be deleted.

Device list/PIN code/call history/phone book/pre-

set phone numbers

1 Press M.C. to show the confirmation display.

YES is displayed. Clearing memory is now on

standby.

If you do not want to clear the Bluetooth device

data stored on this unit, turn M.C. to display

CANCEL and press it again to select.

2 Press M.C. to clear the memory.

CLEARED is displayed and the Bluetooth de-

vice data is cleared.

! While this function is in use, do not turn off

the engine.

BT VERSION (Bluetooth version display)

You can display the system versions of this unit

and of Bluetooth module.

1 Press M.C. to display the information.

<QRD3221-B>13

Section