Pioneer MVH-X365BT Servis Kılavuzu - Sayfa 17

Araç Alıcısı Pioneer MVH-X365BT için çevrimiçi göz atın veya pdf Servis Kılavuzu indirin. Pioneer MVH-X365BT 46 sayfaları.

Sayfayı Yazdır

6.3 SOFTWARE VERSION UP METHOD

Overview

This mode is used for upgrading the MCU software of system using USB memory.

How to enter in USB rewriting mode

Press and hold "1" and "2" buttons together, and turn BUP and ACC on.

USB rewriting operation flow

Explanatory note

Screen display and ON/OFF of illumination

USB

Characters displayed on the screen

Red frame: illumination lights up

Gray frame: illumination lights off

Blue characters: operation to be carried out by a user of USB rewriting function

Press and hold "1" and "2" buttons together, and turn BUP and ACC on.

(4) Retry count over

CAN'T UPDT

Display is continued until

In 5 seconds, usual operation

the power supply is turned

(OFF SOURCE)

OFF

Result of rewriting

(1) Rewriting succeeded

(2) Upgrading file error

Upgrading file is not detected

(3) Rewriting failed

(4) Retry count over

START UPDT

Press LIST button

* After connecting USB memory in which upgrading file is stored, press LIST button.

Retry rewriting

Check of upgrading file is started

CHECK FILE

Rewriting is started

If the power supply is turned OFF

during rewriting, retry the rewriting.

DON'T STOP

Switched every

5 seconds

PRG **/100

(1) Rewriting succeeded

COMPLETE

ERR->RETRY

In 5 seconds, rewriting

is retried

Displayed when USB rewriting is normally terminated.

In 5 seconds, usual operation (OFF SOURCE) is started.

Displayed when there is no upgrading file in USB memory or the data of upgrading file is different.

In 5 seconds, usual operation (OFF SOURCE) is started.

If the upgrading file error is detected or the upgrading file is not detected after the rewriting is retried, the rewriting is failed.

In 5 seconds, rewriting is retried.

Displayed when the writing of upgrading file in serial Flash is not normally terminated.

Or, displayed if the upgrading file error is detected or the upgrading file is not detected after the rewriting is retried.

In 5 seconds, rewriting is retried.

Displayed when the retry becomes unavailable because the retry count is exceeded.

The display is continued until the power supply is turned OFF. If the power supply is turned ON again, the display is not changed.

The upgrading using USB is disabled, so it is necessary to write programs in serial Flash using E10A.

MVH-X360BT/XINEW5

As the reset is internally carried out,

display and illumination go out

(2) Upgrading file is not detected

Upgrading file error

First time