Pioneer NC-50DAB Kullanım Kılavuzu - Sayfa 31

Araç Alıcısı Pioneer NC-50DAB için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Pioneer NC-50DAB 42 sayfaları. Network cd receiver

Sayfayı Yazdır

> Before Start

> Part Names

Make Wi-Fi connection settings. (

This can be set only when "Wi-Fi" is selected in "Connection".

0 You can make Wi-Fi connection settings using a web browser on a computer. For details,

refer to "Web Setup" (

P33).

■ DHCP

"On" (Default Value): Auto configuration by DHCP

"Off": Manual configuration without DHCP

If selecting "Off", you must set "IP Address", "Subnet Mask", "Gateway", and "DNS Server"

manually.

■ IP Address

Displays/Sets the IP address.

■ Subnet Mask

Displays/Sets the subnet mask.

■ Gateway

Displays/Sets the gateway.

■ DNS Server

Displays/Sets the primary DNS server.

■ Proxy URL

Displays/Sets the proxy server URL.

■ Proxy Port

Displays/Sets the proxy server port number when you enter "Proxy URL".

■ Friendly Name

Change the device name for this unit which is shown on other devices connected to the

network to an easily recognized name. You can input up to 31 characters. For details on how

to enter text, refer to "Entering text" (

■ AirPlay Password

You can set a password of up to 31 characters so that only registered users can use AirPlay.

> Install

P9)

P29). After finishing input, press ENTER.

> Initial Setup

> Playback

For details on how to enter text, refer to "Entering text" (

ENTER.

■ Network Check

You can check the network connection.

Option Setting

■ Power Off Setting

Auto Standby

Network Standby

Bluetooth Wakeup

■ Digital Filter

"Slow": Soft and fluid sound

"Sharp" (Default Value): Sound with more structure and firmness

"Short": Sound that starts quick and seems to move forward

■ Language

Advanced Setup

P29). After finishing input, press

This setting places the unit on standby automatically after 20

minutes of inactivity without any audio input.

"On" (Default Value): The unit will automatically enter standby

mode.

"Off": The unit will not automatically enter standby mode.

When this feature is turned "On", you can turn on the power of the

unit via the network using an application that can control this unit.

0 Setting to "On" (Default Value) increases the power

consumption even when the unit is on standby.

0 "Network Standby", which suppresses power consumption,

may be disabled when the network connection is lost.

This function wakes up the unit on standby by connecting a

BLUETOOTH enabled device.

"On": Use this function

"Off" (Default Value): Do not use this function

0 Setting to "On" increases the power consumption even when

the unit is on standby.

0 This setting is fixed to "Off" if "Bluetooth Setting" - "Auto Input

Change" is set to "Off".

| Firmware Update | Others