Pioneer SPH-10BT Ürün Yazılımı Güncelleme Talimatları - Sayfa 3

Araç Alıcısı Pioneer SPH-10BT için çevrimiçi göz atın veya pdf Ürün Yazılımı Güncelleme Talimatları indirin. Pioneer SPH-10BT 6 sayfaları. Smartphone receiver
Ayrıca Pioneer SPH-10BT için: Kurulum Kılavuzu (33 sayfalar), Ürün Yazılımı Güncelleme Talimatları (4 sayfalar), Kullanım Kılavuzu (35 sayfalar), Sistem Ürün Yazılımı Güncelleme Talimatları (7 sayfalar)

Sayfayı Yazdır
Pioneer SPH-10BT Ürün Yazılımı Güncelleme Talimatları
Downloading the firmware update files from Pioneer's website
1.
Download the firmware update files by clicking on the following link and finding your product:
pioneerelectronics.com/firmware
2.
Locate the downloaded .zip file, extract the downloadable file and copy it onto the USB device.
The Downloaded ZIP file will produce the following file when decompressed: (See the table below)
Model Name
SPH-10BT
Updating the firmware on your Unit
IMPORTANT
•
DO NOT perform this firmware update if the model number of your Pioneer product is anything other
than one of the above models.
•
Ensure that the update file is located within the root (top) folder of your USB storage device. There
should be no other files within the USB storage device.
•
While your unit is being updated, DO NOT turn off the system's power and DO NOT touch the unit's
touchscreen as this may result in severe damage to your unit.
•
DO NOT remove the USB storage device during the firmware update process.
•
Performing the firmware update will restore all settings to their default values.
•
Disconnect any external mobile devices connected to your unit before starting the update process.
Procedure:
1.
Connect a blank (formatted) USB storage device to your computer, then locate and copy the correct
update "xxx.scd" file onto the USB storage device.
2.
Start the vehicle engine (in an open, well-ventilated area).
3.
Connect the USB storage device to the USB input on your unit.
4.
If AV Source is On, Press and hold SOURCE(MUSIC)/OFF to set the unit Source OFF.
If Pioneer Smart Sync is connected, disconnect.
5.
Press and hold Application Launch to display the Initial menu.
6.
Update necessary if:
Current version is 08.26 or lower
File name
19DEH_A0827.scd
Update Version
08.27