Pioneer Super Tuner III D DEH-P4800MP Kullanım Kılavuzu - Sayfa 4
Araç Alıcısı Pioneer Super Tuner III D DEH-P4800MP için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Pioneer Super Tuner III D DEH-P4800MP 36 sayfaları. Owner's manual
Ayrıca Pioneer Super Tuner III D DEH-P4800MP için: Kurulum Kılavuzu (8 sayfalar), Kullanıcı El Kitabı (34 sayfalar)
Sayfayı Yazdır
MAN-DEH-P4800MP-GB.fm Page 4 Thursday, September 29, 2005 11:55 AM
Connecting the Units
Note
Depending on the kind of vehicle, the function of 3*
and 5* may be different. In this case, be sure to
connect 2* to 5* and 4* to 3*.
Connect leads of the same
color to each other.
Cap (1*)
When not using this
terminal, do not remove
the cap.
Yellow (3*)
Yellow (2*)
Back-up (or accessory)
To terminal always supplied with
power regardless of ignition switch
position.
Red (5*)
Red (4*)
Accessory (or back-up)
To electric terminal controlled by
ignition switch (12 V DC) ON/OFF.
Black (ground)
To vehicle (metal) body.
ISO connector
Yellow/black
Note
If you use a cellular telephone, connect it via
In some vehicles, the ISO connector may be
the Audio Mute lead on the cellular telephone.
divided into two. In this case, be sure to
If not, keep the Audio Mute lead free of any
connect to both connectors.
connections.
This product
Front output
Subwoofer output or
Rear output
Antenna jack
Fuse (10 A)
IP-BUS input
(Blue)
IP-BUS cable
Blue/white
To system control terminal of the
power amp (max. 300 mA 12 V DC).
Blue/white (7*)
To Auto-antenna relay control
terminal (max. 300 mA 12 V DC).
Blue/white (6*)
Speaker leads
White:
White/black:
Gray:
Gray/black:
Green:
Green/black:
Violet:
Violet/black:
Connecting cords with RCA pin
plugs (sold separately)
AUX jack (3.5 ø)
Jack for Wired Remote Control
Note
Please see the Instruction Manual
Use a stereo mini plug
for the Wired Remote Control (sold
cable to connect with
separately).
auxiliary equipment.
Mult-CD player
(sold separately)
System remote control
The pin position of the ISO connector will differ
The pin position of the ISO connector will differ
depends on the type of vehicle. Connect 6* and 7*
depends on the type of vehicle. Connect 6* and 7*
when Pin 5 is an antenna control type. In another
when Pin 5 is an antenna control type. In another
type of vehicle, never connect 6* and 7*.
type of vehicle, never connect 6* and 7*.
Front speaker
Left
Subwoofer or
Rear speaker
Front left +
Front left -
Front right +
Front right -
Rear left + or Subwoofer +
Rear left - or Subwoofer -
Rear right + or Subwoofer +
Rear right - or Subwoofer -
4
Power amp
(sold separately)
Power amp
(sold separately)
Front speaker
Right
Subwoofer or
Rear speaker
Perform these connections when
using the optional amplifier.
Note
Change the initial setting of this unit (refer
to the Operation Manual). The subwoofer
output of this unit is monaural.