Pioneer Super Tuner IIID AVH-P4100DVD Kurulum Kılavuzu - Sayfa 3
Araç Alıcısı Pioneer Super Tuner IIID AVH-P4100DVD için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Pioneer Super Tuner IIID AVH-P4100DVD 8 sayfaları. Dvd rds av receiver
Ayrıca Pioneer Super Tuner IIID AVH-P4100DVD için: Kurulum Kılavuzu (43 sayfalar), Broşür (9 sayfalar), Hızlı Başlangıç Kılavuzu (8 sayfalar)
Sayfayı Yazdır
Connecting the units
When connecting with a rear view camera
When this product is used with a rear view camera, it is possible to automatically switch from
the video to rear view image when the gear shift is moved to REVERSE (R).
WARNING
USE INPUT ONLY FOR REVERSE OR MIRROR IMAGE REAR VIEW CAMERA. OTHER USE MAY
RESULT IN INJURY OR DAMAGE.
CAUTION
• The screen image may appear reversed.
• The rear view camera function is to be used as an aid for backing into a tight parking spot. Do
not use this function for entertainment purposes.
• Objects in the rear view may appear closer or more distant than they actually are.
CAUTION
You must use a camera
Rear view camera input
which outputs mirror
(REAR CAMERA IN)
This product
reversed images.
To video output
Rear view camera
RCA cable
(sold separately)
Fuse resistor
Violet/white
Of the two lead wires connected to the back lamp, connect the one
in which the voltage changes when the gear shift is in the
REVERSE (R) position. This connection enables the unit to
sense whether the car is moving forwards or backwards.
• It is necessary to set Camera Polarity properly in System Menu when connecting the rear view
camera.
Connecting the units
When connecting with a multi-channel processor
Navigation Unit
(sold separately)
Microphone
for hands-free phoning
Please contact your dealer to inquire
(supplied with Bluetooth adapter)
about the connectable navigation unit.
Wired remote input
Optical output
Hard-wired remote control
(Black)
Bluetooth adapter
adaptor can be connected
(e.g. CD-BTB200)
(sold separately).
(sold separately)
Blue
IP-BUS input
RGB input
Blue
This product
To RR
To RL
IP-BUS cable
(Supplied with Bluetooth adapter)
Black
Optical cable connection box
(supplied with multi-channel processor)
Optical cable
(supplied with
RCA cable (supplied with
multi-channel processor)
multi-channel processor)
Blue
Multi-channel processor
(e.g., DEQ-P6600)
(sold separately)
Black
IP-BUS cable (supplied with
multi-channel processor)
Connecting the units
Connecting and installing the optical cable connection box
Installing the optical cable
WARNING
connection box
• Avoid installing the optical cable connection
• When installing the optical cable
box in locations where the operation of safety
connection box with the hook and loop
devices such as airbags is prevented by this
fastener.
unit. Otherwise, there is a danger of a fatal
accident.
Install the optical cable connection box
• Avoid installing the optical cable connection
using the hook and loop fastener in the
box in locations where the operation of the
ample space of the console box.
brake may be prevented. Otherwise, it may
result in a traffic accident.
• Fix the optical cable connection box securely
with the hook and loop fastener or lock tie. If
the unit is loose, it disturbs driving stability,
which may result in a traffic accident.
CAUTION
Black
• Install this unit using only the parts supplied with
this unit. If other parts are used, this unit may be
damaged or could dismount itself, which leads to
• When installing the optical cable
an accident or other problems.
• Do not install this unit near the doors where
connection box with the lock tie.
rainwater is likely to be spilled on the unit. Incursion
Wrap the optical cable and connection box with
of water into the unit may cause smoke or fire.
the protection tape and fasten with the power
code using the lock tie.
Connecting the optical cable
1. Connect the optical cable and ground
lead to the main unit.
Connect the optical cable so that it does not
protrude from the main unit, as shown in the
illustration. Fasten the ground lead to the
protrusion on the back of the main unit.
Fasten with the lock tie
Screw
2. Connect the optical cable to the optical
cable connection box.
Optical cable
Connecting the units
When connecting the external video component and the display
Hook fastener
Loop fastener
Video input (V IN)
Audio input
This product
(L IN, R IN)
Wrap with the protection tape
• It is necessary to change AV Input in System Menu when connecting the external video
component.
When using a display connected to rear video output
This product's rear video output is for connection of a display to enable passengers in the rear
seats to watch video.
WARNING
Never install the display in a location where it is visible to the driver while driving.
Display with RCA
input jacks (sold
separately)
To video input
RCA cables (sold separately)
Rear monitor output
(V OUT)
To video output
To audio outputs
External video
component (sold
separately)