Pioneer Super Tuner IIID AVH-P5000DVD Kurulum Kılavuzu - Sayfa 3
Araç Alıcısı Pioneer Super Tuner IIID AVH-P5000DVD için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Pioneer Super Tuner IIID AVH-P5000DVD 8 sayfaları. Pioneer avh-p5000dvd: install guide
Ayrıca Pioneer Super Tuner IIID AVH-P5000DVD için: Kurulum Kılavuzu (9 sayfalar)
Sayfayı Yazdır
Connecting the Units
When connecting with a rear view camera
When this product is used with a rear view camera, it is possible to automatically switch
from the video to rear view image when the gear shift is moved to REVERSE (R).
WARNING
USE INPUT ONLY FOR REVERSE OR MIRROR IMAGE REAR VIEW CAMERA. OTHER USE MAY
RESULT IN INJURY OR DAMAGE.
CAUTION
•
The screen image may appear reversed.
•
The rear view camera function is to be used as an aid for backing into a tight parking spot. Do not use this
function for entertainment purposes.
•
Objects in the rear view may appear closer or more distant than they actually are.
CAUTION
You must use a camera
This product
which outputs mirror
reversed images.
Rear view camera input
(REAR VIEW
CAMERA IN)
Rear view camera
20 cm
To video output
RCA cable
(sold separately)
15 cm
Fuse resistor
Violet/white
Of the two lead wires connected to the back lamp, connect the
one in which the voltage changes when the gear shift is in the
REVERSE (R) position. This connection enables the unit to
sense whether the car is moving forwards or backwards.
Connection method
1. Clamp the lead.
2. Clamp firmly with
needle-nosed pliers.
Note:
• It is necessary to set CAMERA POLARITY properly in SYSTEM MENU when
connecting the rear view camera.
When connecting with a multi-channel processor
This product
25 cm
Video input
(VIDEO INPUT)
IP-BUS input (Blue)
IP-BUS cable
Blue
(supplied with DVD
DEQ output (REAR/
player)
SUBWOOFER/DEQ OUTPUT)
Black
15 cm
RCA cable (supplied with
Optical cable (supplied with
Optical cable connection box
multi-channel processor)
multi-channel processor)
(supplied with multi-channel
processor)
DVD player (e.g., XDV-P6)
Optical cable (sold
(sold separately)
separately)
Blue
Black
Hide-away unit (supplied
with DVD player)
Front video output
Black
Blue
(Yellow)
Black
25 pin cable (supplied
Multi-channel processor
with DVD player)
(e.g., DEQ-P6600)
(sold separately)
RCA cable (supplied
with DVD player)
Black
Blue
IP-BUS cable
IP-BUS cable (supplied with
multi-channel processor)
Multi-CD player
When you connect a separately sold
(sold separately)
DVD player to the separately sold
multi-channel processor, the optical
cable from DVD player must be
connected to the optical cable 2 input
(OPT. IN2) of the multi-channel
You can use only one video component
processor.
with this unit.
Connecting and installing the
optical cable connection box
WARNING
• Avoid installing this unit in locations where the
operation of safety devices such as airbags is pre-
Optical cable
vented by this unit. Otherwise, there is a danger of
a fatal accident.
• Avoid installing this unit in locations where the
operation of the brake may be prevented.
Otherwise, it may result in a traffic accident.
Installing the optical cable
• Fix this unit securely with the hook and loop fas-
connection box
tener or lock tie. If this unit is loose, it disturbs dri-
ving stability, which may result in a traffic acci-
• When installing the optical cable
dent.
connection box with the hook and
CAUTION
loop fastener.
• Install this unit using only the parts supplied with
this unit. If other parts are used, this unit may be
Install the optical cable connection box
damaged or could dismount itself, which leads to
using the hook and loop fastener in the
an accident or other problems.
ample space of the console box.
• Do not install this unit near the doors where rain-
water is likely to be spilled on the unit. Incursion
of water into the unit may cause smoke or fire.
Hook fastener
Connecting the optical cable
Loop fastener
1. Connect the optical cable and
ground lead to the main unit.
Connect the optical cable so that it does
not protrude from the unit, as shown in
the illustration. Fasten the ground lead
to the protrusion on the back of the
• When installing the optical cable
unit.
connection box with the lock tie.
Wrap the optical cable and connection
box with the protection tape and fasten
with the power code using the lock tie.
Wrap with the protection tape
Screw
2. Connect the optical cable to the
optical cable connection box.
Fasten with the lock tie
ENGLISH
When connecting the external video component and the display
Rear monitor output
(REAR MONITOR OUTPUT)
To video input
Display with
RCA input jacks
(sold separately)
20 cm
This product
RCA cables (sold separately)
Video input
(VIDEO INPUT)
To video output
External video
25 cm
component
(sold separately)
Audio input
To audio outputs
(AUDIO INPUT)
• It is necessary to set AV INPUT to VIDEO in SYSTEM MENU when connecting the
external video component.
• It is necessary to set AV INPUT to S-DVD in SYSTEM MENU when connecting a
multi-DVD player.
When using a display connected to rear video output
This product's rear video output is for connection of a display to enable passengers in the
rear seats to watch the DVD or Video CD.
WARNING
• NEVER install the display in a location that enables the Driver to watch the DVD or Video CD
while driving.