Pioneer Super Tuner IIID DEH-4250SD Kullanım Kılavuzu - Sayfa 7

Araç Alıcısı Pioneer Super Tuner IIID DEH-4250SD için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Pioneer Super Tuner IIID DEH-4250SD 23 sayfaları. Cd receiver
Ayrıca Pioneer Super Tuner IIID DEH-4250SD için: Kurulum Kılavuzu (8 sayfalar)

Sayfayı Yazdır

Pioneer Super Tuner IIID DEH-4250SD Kullanım Kılavuzu

Operating this unit

Important

! Do not store the remote control in high tem-

peratures or direct sunlight.

! The remote control may not function properly

in direct sunlight.

! Do not let the remote control fall onto the

floor, where it may become jammed under the

brake or accelerator pedal.

Menu operations identical

for function settings/audio

adjustments/initial

settings/lists

Returning to the previous display

Returning to the previous list/category (the folder/ca-

tegory one level higher)

1 Press

/DISP/SCRL.

Returning to the main menu

Returning to the top tier of list/category

1 Press and hold

/DISP/SCRL.

Returning to the ordinary display

Canceling the initial setting menu

Returning to the ordinary display from the list/cate-

gory

1 Press BAND/ESC.

Tuner

Important

If you are using this unit in North, Central or

South America, reset the AM tuning step (refer to

AM step (AM tuning step) on page 14).

Basic Operations

Selecting a band

1 Press BAND/ESC until the desired band (FM1,

FM2, FM3 for FM or AM) is displayed.

Manual tuning (step by step)

1 Push M.C. left or right.

Seeking

1 Push and hold M.C. left or right, and then re-

lease.

You can cancel seek tuning by pushing M.C. left

or right.

While pushing and holding M.C. left or right, you

can skip stations. Seek tuning starts as soon as

you release M.C.

Storing and recalling stations

You can easily store up to six stations for each

band as presets.

Using preset tuning buttons

When you find a station that you want

to store in memory, press one of the preset

tuning buttons (1 to 6) and hold until the

preset number stops flashing.

Press one of the preset tuning buttons

(1 to 6) to select the desired station.

Using preset screen

Press

to switch to the preset screen.

Use M.C. to store the selected fre-

quency in memory.

Turn to change the preset number. Press and

hold to store.

Use M.C. to select the desired station.

Turn to change the station. Press to select.

Note

You can also recall stored radio stations by push-

ing M.C. up or down during the frequency dis-

play.

Section