Pioneer XW-DV535W Kullanım Talimatı - Sayfa 42

Araç Alıcısı Pioneer XW-DV535W için çevrimiçi göz atın veya pdf Kullanım Talimatı indirin. Pioneer XW-DV535W 47 sayfaları. Dvd/cd receiver; speaker system; digital; wireless speaker system

Sayfayı Yazdır

Additional information

Tuner

Problem

Considerable noise in

radio broadcasts.

Auto tuning does not

pick up some stations.

Wireless speaker system

Problem

The power does not

turn on.

Audio is interrupted.

Audio is suddenly

interrupted.

Audio cannot be

received.

Remedy

• Connect the AM antenna (refer to the Setup Guide) and adjust the direction

and position for best reception. You may also connect an additional internal

or external AM antenna (refer to Connecting auxiliary components on

page 27).

• Fully extend the FM wire antenna, position for best reception, and secure to

a wall. You may also connect an outdoor FM antenna (see Connecting external

antennas on page 27).

• Turn off other equipment that may be causing the noise or move it further

away.

• If the transmitter is too close, you may want to distance it from the radio

antennas.

• The radio signal is weak. Auto tuning will only detect radio stations with a

good signal. For more sensitive tuning, connect an outdoor antenna.

Remedy

• Make sure the supplied power cord (or AC adaptor) is fully inserted into the

AC IN inlet (or DC IN inlet).

• Connect the power plug to the wall outlet.

• Disconnect the power plug from the outlet, and insert again.

• This system uses high frequency radio waves that have properties similar to

light, such as linearity, reﬂection, refraction, diffraction, and interference.

Therefore, placement of the system can result in weak radio waves and/or

interruption.

• The distance between the transmitter and wireless speaker may be too

large. Use the wireless speaker within the reach of radio wave from the

transmitter.

• The system may be close to a location generating electrical noise. If this is

the case, ﬁnd a location that does not affect the sound adversely.

• There may be radio communication equipment using the same frequency

band (2.4 GHz) as this system, such as a Bluetooth device, radio LAN device,

cordless phone or microwave oven, operating nearby.

• The radio wave reception is variable depending on locations due to the

effects of obstacles and reﬂecting objects. Try changing the location of the

wireless speaker a little.

• The transmitter and wireless speaker are designed and sold as a pair, and

they identify each other in communication. This means that communication

is not available between separately purchased transmitter and wireless

speaker.