Pioneer DEH-P7400HD Kullanıcı El Kitabı - Sayfa 5
Alıcı Pioneer DEH-P7400HD için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Pioneer DEH-P7400HD 39 sayfaları. Cd rds receiver
Sayfayı Yazdır
Operating this unit
Part
Operation
Press to increase or decrease
e
VOLUME
volume.
Press to mute. Press again to
f
MUTE
unmute.
Press to perform manual seek
tuning, fast forward, reverse
g
and track search controls.
a/b/c/d
Also used for controlling func-
tions.
While operating the phone,
h
press to end a call or reject an
incoming call.
Press to pause or resume play-
i
e
back.
Press to start talking on the
j
phone while operating a
phone.
Press to display the disc title,
track title, folder, or file list de-
LIST/
k
pending on the source.
ENTER
While in the operating menu,
press to control functions.
(DEH-P7400HD)
e
f
c
k
g
j
h
1
b
i
Part
Operation
Press to increase or decrease
e
VOLUME
volume.
Press to mute. Press again to
f
MUTE
unmute.
Press to perform manual seek
tuning, fast forward, reverse
g
and track search controls.
a/b/c/d
Also used for controlling func-
tions.
Press to select an audio func-
h
AUDIO
tion.
Press to pause or resume play-
i
e
back.
Press to select functions.
FUNC-
Press and hold to recall the ini-
j
TION
tial setting menu when the
sources are off.
Press to display the disc title,
track title, folder, or file list de-
LIST/
k
pending on the source.
ENTER
While in the operating menu,
press to control functions.
Set up menu
When you turn the ignition switch to ON after in-
stallation, set up menu appears on the display.
You can set up the menu options below.
1
After installation of this unit, turn the
ignition switch to ON.
SET UP appears.
2
Turn M.C. to switch to YES.
# If you do not operate for 30 seconds, the set up
menu will not be displayed.
# If you prefer not to set up at this time, turn M.C.
to switch to NO.
Operating this unit
If you select NO, you cannot set up in the set up
menu.
3
Press M.C. to select.
4
Perform the following procedures to set
the menu.
To proceed to the next menu option, you need to
confirm your selection.
Language select (multi-language)
1 Turn M.C. to select the desired language.
English—Français—Español
2 Press M.C. to confirm the selection.
Calendar (setting the date)
1 Turn M.C. to change the year.
2 Press M.C. to select day.
3 Turn M.C. to change the day.
4 Press M.C. to select month.
5 Turn M.C. to change the month.
6 Press M.C. to confirm the selection.
Clock (setting the clock)
1 Turn M.C. to adjust hour.
2 Press M.C. to select minute.
3 Turn M.C. to adjust minute.
4 Press M.C. to confirm the selection.
Contrast (display contrast setting)
1 Turn M.C. to adjust the contrast level.
0 to 15 is displayed as the level is increased or
decreased.
2 Press M.C. to confirm the selection.
Demonstration (demo display setting)
1 Turn M.C. to set the demo display to off.
2 Press M.C. to confirm the selection.
Quit appears.
5
To finish your settings, turn M.C. to select
YES.
# If you prefer to change your setting again, turn
M.C. to switch to NO.
6
Press M.C. to select.
Notes
! Because demonstration mode is the function
for displaying at stores, do not use this func-
tion while driving.
! You can set up the menu options in the initial
settings. For details about the settings, refer
to Initial settings on page 14.
! You can cancel set up menu by pressing
SRC/OFF.
Basic operations
Important
! Handle gently when removing or attaching
the front panel.
! Avoid subjecting the front panel to excessive
shock.
! Keep the front panel out of direct sunlight
and high temperatures.
! To avoid damaging the device or vehicle inte-
rior, remove any cables and devices attached
to the front panel before detaching it.
Section
02
5
En