Pioneer DVH-P500UB Kurulum Kılavuzu - Sayfa 2

Alıcı Pioneer DVH-P500UB için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Pioneer DVH-P500UB 8 sayfaları. Dvd rds receiver

Sayfayı Yazdır

Connecting the Units

Connecting to separately sold power amp

Front output

Rear output

This product

Subwoofer output

Blue/white

Connect to system control terminal of the

power amp (max. 300 mA 12 V DC).

Blue/white (7*)

Blue/white (6*)

Connect to auto-antenna relay control

terminal (max. 300 mA 12 V DC).

The pin position of the ISO connector will

differ depends on the type of vehicle.

When you connect separately sold multi-channel

Connect 6* and 7* when Pin 5 is an

processor (e.g. DEQ-P6600) to this unit, do not

antenna control type. In another type of

connect anything to the speaker leads and system

vehicle, never connect 6* and 7*.

remote control (blue/white).

When you connect multi-channel processor to

this unit, separately sold power amp must be

connected to multi-channel processor.

Note:

Change the initial setting of this product (refer

to the Operation Manual).

The subwoofer output of this unit is monaural.

Power amp (sold

separately)

Connect with RCA cables

(sold separately)

Power amp (sold

separately)

Power amp (sold

separately)

System remote control

Left

Right

Front speaker

Rear speaker

Subwoofer

Perform these connections when

using the optional amplifier.

When connecting with a multi-channel processor

Rear view camera

Not used

To video output

AV system display

(e.g. AVX-7600)

Video input 2

(sold separately)

(VIDEO 2/BACK

CAMERA INPUT)

Video input

RCA cable

(VIDEO INPUT)

(sold separately)

RCA cable

(supplied)

RCA cable

This product

(supplied with multi-

channel processor)

15 cm

Video output

DEQ output

Black

(VIDEO OUTPUT)

Blue

Optical cable connection

box (supplied with multi-

Optical cable

channel processor)

(supplied with multi-

channel processor)

Blue

Black

If AV system display (e.g. AVX-7600)

is combined with this unit, connect the

Multi-channel processor

(DEQ-P6600)

rear view camera to the AV system

display. For details concerning

(sold separately)

connection methods, refer to AV system

display's instruction manual.

If AV system display is not combined

with this unit, connect the rear view

Black

Blue

camera to this unit's video input. For

details concerning connection, refer to

Multi-CD player

When connecting with a rear view

IP-BUS cable

(sold separately)

camera.

IP-BUS cable

(supplied with multi-channel

processor)

Connecting and installing the

Installing the optical cable

optical cable connection box

connection box

• When installing the optical cable

WARNING

• Avoid installing this unit in locations where the

connection box with the hook and

operation of safety devices such as airbags is pre-

loop fastener.

vented by this unit. Otherwise, there is a danger of

Install the optical cable connection box

a fatal accident.

• Avoid installing this unit in locations where the

using the hook and loop fastener in the

operation of the brake may be prevented.

ample space of the console box.

Otherwise, it may result in a traffic accident.

• Fix this unit securely with the hook and loop fas-

tener or lock tie. If this unit is loose, it disturbs dri-

1.5 m

ving stability, which may result in a traffic acci-

dent.

CAUTION

• Install this unit using only the parts supplied with

this unit. If other parts are used, this unit may be

damaged or could dismount itself, which leads to

an accident or other problems.

• Do not install this unit near the doors where rain-

water is likely to be spilled on the unit. Incursion

• When installing the optical cable

of water into the unit may cause smoke or fire.

connection box with the lock tie.

Connecting the optical cable

Wrap the optical cable and connection

box with the protection tape and fasten

1. Connect the optical cable and

with the power code using the lock tie.

ground lead to the main unit.

Connect the optical cable so that it does

not protrude from the unit, as shown in

the illustration. Fasten the ground lead

to the protrusion on the back of the

unit.

Screw

2. Connect the optical cable to the

optical cable connection box.

Optical cable

Hook fastener

Loop fastener

Wrap with the protection tape

Fasten with the lock tie