Pioneer VSX-C301 Kullanım Talimatları Kılavuzu - Sayfa 27
Alıcı Pioneer VSX-C301 için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. Pioneer VSX-C301 40 sayfaları. Audio video multi-channel receiver
Ayrıca Pioneer VSX-C301 için: Kullanım Talimatları Kılavuzu (44 sayfalar)
Sayfayı Yazdır
Using other functions
Chapter 8
Using other functions
Selecting the input signal type
The DVD, TV/SAT, DVR/VCR and FRONT inputs all have
both analog and digital jacks. You can select the type of
signal to be used in each case. The input signal type for
the current input is indicated in the display: ANA
(analog), DIG (digital).
The default AUTO setting is usually sufficient, letting the
receiver decide the most suitable signal type. However, if
you want to record from the or the DVR/VCR IN/OUT
jacks, then you should set the input signal type to analog.
INPUT
TEST TONE
AUTO
STEREO
SOUND
MUTE
ROOM
SETUP
DTV MENU
TOP MENU
ST
•
Press SIGNAL SELECT to change the input signal
type.
• SEL. AUTO – (default setting) Uses digital if available,
otherwise analog
• SEL. ANA – Uses the analog signal
• SEL. DIG – Uses the digital signal
Note
• When the FM/AM input is used, the display always
shows ANA (analog).
Using the sleep timer
The sleep timer automatically puts the receiver into
standby after the specified period of time.
RECEIVER
RECEIVER
SLEEP
DVD
AV DIRECT
INPUT
TEST TONE
AUTO
STEREO
•
Press SLEEP to set the sleep timer.
Press repeatedly to select between:
• 90 MIN. – Switches to standby after 90 minutes
• 60 MIN. – Switches to standby after one hour
• 30 MIN. – Switches to standby after 30 minutes
The sleep timer indicator (
has been set.
FRONT
FM/AM
LEVEL
CH SELECT
ADVANCED
SURROUND
SURROUND
SIGNAL
MODE
DIALOG
SELECT
MASTER
VOLUME
SYSTEM
SETUP
TUNE
T.EDIT
MENU
ST
STB
DVR/TV
FRONT
FM/AM
LEVEL
CH SELECT
ADVANCED
SURROUND
SURROUND
) lights when the sleep timer
Tip
• Press the SLEEP button once to view how much time
is left on the timer before shutdown. Each press after
that will cycle through the possible sleep time
lengths.
Resetting the system
Use this feature to reset the system to its factory default
settings.
RECEIVER
RECEIVER
SLEEP
DVD
AV DIRECT
INPUT
TEST TONE
AUTO
STEREO
SOUND
MUTE
ROOM
SETUP
DTV MENU
TOP MENU
ST
1
Press RECEIVER.
2
In standby, press ROOM SETUP and SYSTEM
SETUP at the same time.
The display prompts you to confirm.
3
Within 5 seconds, press LEVEL –.
The display shows OK.
4
Within 5 seconds, press LEVEL +.
The receiver should now be reset.
Note
• If the receiver is disconnected from the power outlet
for more than a month it will reset to the default
settings.
• The above reset doesn't affect the presets that you
have programmed into the remote control (see Using
the remote control with other components on
page 32).
STB
DVR/TV
FRONT
FM/AM
LEVEL
CH SELECT
ADVANCED
SURROUND
SURROUND
SIGNAL
DIALOG
MODE
SELECT
MASTER
VOLUME
SYSTEM
SETUP
TUNE
T.EDIT
MENU
ST
ENTER
08
27
En