Pioneer VSX-LX302 Temel Kılavuz - Sayfa 16

Alıcı Pioneer VSX-LX302 için çevrimiçi göz atın veya pdf Temel Kılavuz indirin. Pioneer VSX-LX302 36 sayfaları.

> Before Start

> Part Names

a Speaker Cable

> Install

> Initial Setup

3/8˝

(10 mm)

> Playback

Connecting with Bi-Amping Speakers (Page 13)

Make sure you remove the jumper bar fitted between the

woofer jacks and tweeter jacks of the front speakers. Refer

to "Standard Connections (Pages 8 to 12)" (P15) to connect

the center speaker, surround speakers, and powered

subwoofer.

0 Also refer to the instruction manual for your speakers

when using connections for Bi-Amping.

Setup

0 Settings for the speaker configuration you have

connected need to be made in "1. Full Auto

MCACC" in Initial Setup (P26).

Make sure the exposed speaker cables do not

stick out of the speaker terminals when

connecting. If the exposed wires of the

speakers touch the rear panel or the + and –

For high-

wires touch each other, the protection circuit

frequency

will be activated.

For low-

frequency