Pioneer AVH-P3200BT Kurulum Kılavuzu - Sayfa 3
Stereo Alıcı Pioneer AVH-P3200BT için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Pioneer AVH-P3200BT 8 sayfaları. Dvd, rds, av receiver
Ayrıca Pioneer AVH-P3200BT için: Kurulum Kılavuzu (40 sayfalar)
Sayfayı Yazdır
Connecting the units
When connecting with a rear view camera
When this product is used with a rear view camera, it is possible to automatically switch from
the video to rear view image when the gear shift is moved to REVERSE (R).
WARNING
USE INPUT ONLY FOR REVERSE OR MIRROR IMAGE REAR VIEW CAMERA. OTHER USE MAY
RESULT IN INJURY OR DAMAGE.
CAUTION
• The screen image may appear reversed.
• The rear view camera function is to be used as an aid for backing into a tight parking spot. Do
not use this function for entertainment purposes.
• Objects in the rear view may appear closer or more distant than they actually are.
CAUTION
You must use a camera
Rear view camera input (R.C IN)
which outputs mirror
reversed images.
To video output
Rear view camera
(sold separately)
RCA cable (sold separately)
(AVH-P4200DVD only)
This product
Fuse resistor
Violet/white
Of the two lead wires connected to the back lamp, connect the one
in which the voltage changes when the gear shift is in the
REVERSE (R) position. This connection enables the unit to
sense whether the car is moving forwards or backwards.
• It is necessary to set Camera Polarity properly in System when connecting the rear view camera.
Connecting the units
When connecting with a multi-channel processor
Microphone
for hands-free phoning
(supplied with Bluetooth adapter)
Bluetooth adapter
(e.g. CD-BTB200)
This product
(sold separately)
IP-BUS input
(AVH-P4200DVD only)
Wired remote input
Hard-wired remote
Blue
control adaptor
can be connected
To SWL
(sold separately).
Optical
To SWR
output
(AVH-P4200DVD only)
IP-BUS cable
(Supplied with Bluetooth adapter)
Black
Optical cable connection box
(supplied with multi-channel processor)
Optical cable
(supplied with
RCA cable (supplied with
multi-channel processor)
multi-channel processor)
Blue
Multi-channel processor
(DEQ-P6600)
(sold separately)
IP-BUS cable (supplied with
multi-channel processor)
Black
Connecting the units
Connecting and installing the optical cable connection box
WARNING
2. Connect the optical cable to the optical
• Avoid installing the optical cable connection
box in locations where the operation of safety
devices such as airbags is prevented by this
unit. Otherwise, there is a danger of a fatal
accident.
• Avoid installing the optical cable connection
box in locations where the operation of the
brake may be prevented. Otherwise, it may
result in a traffic accident.
Installing the optical cable
• Fix the optical cable connection box securely
with the hook and loop fastener or lock tie. If
connection box
the unit is loose, it disturbs driving stability,
which may result in a traffic accident.
• When installing the optical cable
Black
CAUTION
• Install this unit using only the parts supplied with
this unit. If other parts are used, this unit may be
damaged or could dismount itself, which leads to
an accident or other problems.
• Do not install this unit near the doors where
rainwater is likely to be spilled on the unit. Incursion
of water into the unit may cause smoke or fire.
Connecting the optical cable
1. Connect the optical cable and ground
lead to the main unit.
Connect the optical cable so that it does not
protrude from the main unit, as shown in the
illustration. Fasten the ground lead to the
• When installing the optical cable
protrusion on the back of the main unit.
Screw
Connecting the units
When connecting the external video component and the display
cable connection box.
optical cable
connection box with the hook and loop
fastener.
Install the optical cable connection box
Rear monitor output (V OUT)
using the hook and loop fastener in the
ample space of the console box.
Video input (V IN)
Hook fastener
Loop fastener
This product
Audio input
(L IN, R IN)
connection box with the lock tie.
Wrap the optical cable and connection box with
the protection tape and fasten with the power
code using the lock tie.
Wrap with the protection tape
• It is necessary to change AV Input in System when connecting the external video component.
When using a display connected to rear video output
This product's rear video output and rear audio output are for connection of a display to
enable passengers in the rear seats to watch the DVD, etc.
Fasten with the lock tie
WARNING
Never install the display in a location where it is visible to the driver while driving.
Display with RCA
input jacks (sold
separately)
To video input
To audio input
RCA cables
(sold separately)
Rear audio output
Mini pin plug cable
(REAR AUDIO OUT)
(sold separately)
To video output
To audio outputs
(AVH-P4200DVD only)
External video
component (sold
separately)