Pioneer VSX-821-K Kullanım Talimatları Kılavuzu - Sayfa 3

Stereo Alıcı Pioneer VSX-821-K için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. Pioneer VSX-821-K 20 sayfaları. Audio/video multi-channel receiver
Ayrıca Pioneer VSX-821-K için: Teknik Özellikler (2 sayfalar), Servis Kılavuzu (9 sayfalar)

Pioneer VSX-821-K Kullanım Talimatları Kılavuzu
WARNING
This equipment is not waterproof. To prevent a fire or
shock hazard, do not place any container filled with
liquid near this equipment (such as a vase or flower
pot) or expose it to dripping, splashing, rain or
moisture.
WARNING
Before plugging in for the first time, read the following
section carefully.
The voltage of the available power supply differs
according to country or region. Be sure that the
power supply voltage of the area where this unit
will be used meets the required voltage (e.g., 230 V
or 120 V) written on the rear panel.
WARNING
To prevent a fire hazard, do not place any naked flame
sources (such as a lighted candle) on the equipment.
This product is for general household purposes. Any
failure due to use for other than household purposes
(such as long-term use for business purposes in a
restaurant or use in a car or ship) and which requires
repair will be charged for even during the warranty
period.
Voltage selector
You can find the voltage selector switch on the rear
panel of multi-voltage models.
The factory setting for the voltage selector is
220-240 V. Please set it to the correct voltage for
your country or region.
D3-4-2-1-3_A1_En
• Saudi Arabia operates on 127 V and 220 V mains
voltage. Please set to the correct voltage before using.
• For Taiwan, please set to 110-127 V before using.
• For Mexico, please set to 110-127V before using.
Before changing the voltage, disconnect the AC power
cord. Use a medium size screwdriver to change the
voltage selector switch.
D3-4-2-1-4*_A1_En
D3-4-2-1-7a_A1_En
For Taiwan exclusively
Taiwanese two pin flat-bladed plug
K041_A1_En
If the AC plug of this unit does not match the AC
outlet you want to use, the plug must be removed
and appropriate one fitted. Replacement and
mounting of an AC plug on the power supply cord of
this unit should be performed only by qualified
service personnel. If connected to an AC outlet, the
cut-off plug can cause severe electrical shock. Make
sure it is properly disposed of after removal.
The equipment should be disconnected by removing
the mains plug from the wall socket when left unused
for a long period of time (for example, when on
vacation).
CAUTION
STANDBY/ON switch on this unit will not
The
completely shut off all power from the AC outlet.
Since the power cord serves as the main disconnect
device for the unit, you will need to unplug it from the
Medium size
AC outlet to shut down all power. Therefore, make
screwdriver
sure the unit has been installed so that the power
cord can be easily unplugged from the AC outlet in
case of an accident. To avoid fire hazard, the power
cord should also be unplugged from the AC outlet
when left unused for a long period of time (for
D3-4-2-1-5*_A1_En
example, when on vacation).
(Symbol examples for batteries)
Pb
D3-4-2-2-1a_A1_En
D3-4-2-2-2a*_A1_En
These symbols are only valid
in the European Union.
K058c_A1_En
3
En