3Com 3C905C-TX-M Hızlı Kılavuz - Sayfa 3

Ağ Kartı 3Com 3C905C-TX-M için çevrimiçi göz atın veya pdf Hızlı Kılavuz indirin. 3Com 3C905C-TX-M 12 sayfaları. Etherlink pci network interface cards
Ayrıca 3Com 3C905C-TX-M için: Hızlı Kılavuz (12 sayfalar)

Sayfayı Yazdır

Introduction

This quick guide explains how to install a 3Com

EtherLink

(3C905C) network interface card (NIC) in a PC running

Microsoft Windows 95 or Windows 98.

For all other operating systems, or for more detailed

information on the 3C905C NIC, see the EtherLink 10/100 PCI

for Complete PC Management Network Interface Card

User Guide.

Installation Overview

Before you physically install the NIC in a PC, you

must run the NIC preinstallation program, located on

EtherDisk

CAUTION: If you do not run the preinstallation program,

the NIC driver and software will not be installed correctly.

See "Running the Preinstallation Program" later in this

quick guide for instructions.

Make sure that you have the following items:

10/100 PCI for Complete PC Management

diskette 1, to prevent conﬂicts with the NIC.

3C905C NIC

3Com EtherDisk diskettes 1, 2, and 3

Remote Wake-Up cable (This cable is optional. Install

it only if you want to use Remote Wake-Up and your

PC is not compliant with PCI 2.2. Contact your PC

manufacturer for the Remote Wake-Up cable.)

SOS or SMBus cable (This cable is optional. Install it only if

you want to use remote system alerts and your PC has a

matching connector on its motherboard. Contact your PC

manufacturer for cabling and installation instructions.)

Introduction