Pioneer VSX-D704S Kullanım Talimatları Kılavuzu - Sayfa 2
Stereo Alıcı Pioneer VSX-D704S için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. Pioneer VSX-D704S 40 sayfaları. Audio/video stereo receiver
Sayfayı Yazdır
IMPORTANT
The lightning flash with arrowhead, within an equilateral
triangle, is intended to alert the user to the presence
of
uninsulated
"dangerous
voltage"
within the product's
enclosure
that may
be of sufficient
magnitude
to
constitute
a risk of electric shock to persons.
CAUTION
CAUTION:
TO PREVENT THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE
COVER (OR BACK).
NO USER-SERVICEABLE
PARTS
INSIDE.
REFER SERVICING
TO QUALIFIED
SERVICE PERSONNEL.
The exclamation point within an equilateral
triangle is
intended to alert the user to the presence of important
operating and maintenance
(servicing)instructions in the
literature accompanying the appliance.
SAFETY
INSTRUCTIONS
READ INSTRUCTIONS
- All the safety
and operating
instructions should be read before the appliance is
operated.
RETAIN
INSTRUCTIONS
- ]'he safety and operating
instructions
should
be
retained
for
future
reference.
HEED WARNING
- All warnings on the appliance and in
the operating
instructions
should
be adhered to.
FOLLOW
INSTRUCTIONS
- All operating
and use in-
structions should be followed.
WATER AND MOISTURE
- The appliance should not
be used near water
for example,
near a bathtub,
washbowl, kitchen sink, laundry tub, in a wet base-
ment. or near a swimming
pool, etc,
LOCATION
- The appliance should be installed
in a
stable location
WALL
OR CEILING
MOUNTING
- The appliance
should not be mounted
to a wall or ceiling.
VENTILATION
- The appliance should be situated
so
that its location or position does not interfere with
its proper ventilation.
For example,
the appliance
should not be situated on a bed. sofa, rug. or similar
surface that may block the ventilation openings; or,
placed in a built-in installation, such as a bookcase
or cabinet that may impede
the flow of air through
the ventilation openings.
HEAT - The appliance
should
be situated
away from
heat sources
such as radiators,
heat
registers,
stoves, or other appliances
(including
amplifiers)
that produce
heat
POWER
SOURCES
- The appliance
should
be con-
nected
to a power
supply
only of the type de-
scribed in the operating instructions or as marked
on the appliance
POWER-CORD
PROTECTION
- Power-supply
cords
should
be routed so that they are not likely to be
walked
on or pinched
by items
placed
upon or
against
them
Pay particular
attention to cords at
plugs,
convemence
receptacles,
and the point
where
they exit from the appliance
POLARIZATION
- If your purchased
product
Ls pro-
vided with a polarized power
plug, please read the
following
instructions.
This product
is equipped
with e polarized alternating
current line plug (a plug
having one blade wider than the other)
This plug
will fit into the power outlet only one way This is a
safety feature
If you are unable to insert the plug
fully into the outlet,
try reversing
the plug
If the
plug should still fail to fit, contact your electrician to
replace
your obsolete
outlet.
Do not defeat
the
safety purpose of the polarized plug
CLEANING
- The appliance
should
be cleaned
only
with a polishing cloth or a soft dry cloth.
Never
clean with furniture
wax, benzine, insecticides
or
other volatile liquids since they may corrode
the
cabinet
POWER UNES - An outdoor antenna should be located
away from power
lines
NONUSE
PERIODS - The power cord of the appliance
should
be unplugged
from the outlet when left un-
used for a long period of time
OBJECT
AND LIQUID
ENTRY - Care should be taken
so that objects do not fall and liquids are not spilled
into the enclosure
through openings.
DAMAGE
REQUIRING
SERVICE
- The appliance
should be serviced by a Pioneer authorized
service
center or qualified service personnel when:
•
The power-supply
cord or the plug has been dam-
aged.
•
Objects
have fallen, or liquid has been spilled into
the appliance.
•
The appliance
has been exposed to rain.
•
The appliance does not appear to operate normally
or exhibits a marked
change in performance.
•
The appliance has been dropped
or the enclosure
damaged.
SERVICING
- The user should not attempt
to serv=ce
the
appliance
beyond
that described
in the
operating
instructions
All other servicing
should
be referred to qualified
service personnel
OUTDOOR
ANTENNA
GROUNDING
- If an outside
antenna is connected to the antenna terminal, be
sure
the antenna
system
is grounded
so as to
provide some protection
against voltage
surges
and built-up static charges.
In the U.S.A. section 8_ 0 of the National Electrical
Code. ANSI/NFPA
70, provides information
with
respect
to proper grounding
of the mast and
supporting
structure,
grounding of the lead-in wire
to an antenna
discharge
unit, size of grounding
conductors,
location of entenna
discharge
unit,
connection
to
grounding
electrodes,
and
requirements
for the grounding
electrode.
See
Fig. A
CART-
An appliance and cart combination
should
be
moved with care. Quick stops, excessive force, and
uneven surfaces may cause the appliance and cart
combination
to overturn.
_"
GROUND_
FIG. A
ANTENNA
LEAD IN
WIRE
NEC
NAI IONAL ELECTRIC CODE
ANTENNA
DISCHARGE
UNIT
(NEC SECTION
810 - 20)
GROUNDING
CONDUCTORS
(NEC SECTION
810 - 21)
GROUND
CLAMPS
=_
POWER SERVICE GROUNDING
ELECTRODE
SYSTEM
(NEC ART 250, PART H)
Note to CATV system
installer
This reminder is provided to call the CATV system installer's attention to Article 820-40 of the NEC that provides guidelines for
proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as
close to the point of cable entry as practical.
Information
to User
Alteration or modifications carried out without appropriate authorization may invalidate the user's right to operate the equipment.
2
<ARB7035>