Pioneer A-502R Kullanım Talimatları Kılavuzu - Sayfa 4
Amplifikatör Pioneer A-502R için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. Pioneer A-502R 13 sayfaları.
Sayfayı Yazdır
PANEL FACILITIES
@ SPEAKERS A selector button
Use this button to listen to the speaker systems connected to
SPEAKERS A terminals.
ON
(mm):
Depressed position: Sound is heard from the speaker
systems.
OFF (I):
Released position: No sound is heard from the speaker
systems.
Set to this position when
listening with
headphones.
SPEAKERS B selector button
Use this button to listen to the speaker systems connected
to
SPEAKERS B terminals.
ON
(mm):
Depressed position: Sound is heard from the speaker
systems.
OFF
(1):
Released position: No sound is heard from the speaker
systems.
Set
to this
position
when
listening
with
headphones.
|
@ PHONES jack
When using headphones, insert the plug into this jack.
@ BASS tone control
Use to adjust the low-frequency tone. The center position is the flat
(normal) position. When turned to the right, low-frequency tones are
emphasized; when turned to the left, low-frequency tones are de-
emphasized.
NOTE:
© This control does not operate when DIRECT button is in the on
position.
® When the indicator on the volume knob is positioned before the 11
o'clock position, the set tone control effect is obtained.
When the indicator on the volume knob is positioned past the 11
o'clock position, the effect becomes increasingly weaker.
() TREBLE tone control
Use to adjust the high-frequency tone. The center position is the flat
(normal) position. When turned to the right, high-frequency tones
are emphasized; when turned to the left, high-frequency tones are
de-emphasized.
NOTE:
© This control does not operate when DIRECT button is in the on
position.
@ When the indicator on the volume knob is positioned before the 11
o'clock position, the set tone control effect is obtained.
When the indicator on the volume knob is positioned past the 11
o'clock position, the effect becomes increasingly weaker.
4
<ARB1422>
(@ BALANCE control
Should normally be left in the center position. Adjust balance if the
sound is louder from one of the speakers. If the right side is louder,
turn toward the L position and if the left side is louder, turn toward
the R position.
NOTE:
This function does not operate when DIRECT button is in the on
position.
(3 REC SELECTOR switch
When this switch is set to a position other than SOURCE or OFF, the
equipment
selected
by REC SELECTOR
switch can be recorded
from, irrespective of the settings of the input selector buttons and
DIRECT button.
TUNER:
To record from the equipment connected to TUNER
terminals.
CD:
To record from the equipment connected
to CD
terminals.
OFF:
In this position, nothing from the REC terminals of
TAPE 1/DAT and TAPE 2 is output. Set to this
position when not recording; the cassette deck will
be disconnected, improving sound quality.
To record from the equipment selected by INPUT
SELECTOR switch.
TAPE 1 ® 2: To record (copy) from the cassette deck of TAPE 1/
DAT terminals,
to the cassette
deck
of TAPE
2
terminals.
TAPE 2 ® 1: To record (copy) from the cassette deck of TAPE 2
terminals, to the cassette deck of TAPE
1/DAT
terminals.
@ LOUDNESS button/indicator
Use when listening at low volume levels.
On:
The indicator lights: Boosts low and high frequencies to give
added punch to playback even at low volume levels.
Off: The indicator goes off: Should normally be left in this position.
NOTE:
This button does not operate when the DIRECT button is in the on
position.
SOURCE: