Pioneer A-509R Servis Kılavuzu - Sayfa 26

Amplifikatör Pioneer A-509R için çevrimiçi göz atın veya pdf Servis Kılavuzu indirin. Pioneer A-509R 30 sayfaları.
Ayrıca Pioneer A-509R için: Kullanım Talimatları Kılavuzu (12 sayfalar)

Sayfayı Yazdır
Pioneer A-509R Servis Kılavuzu
A-509R

8. PANEL FACILITIES AND SPECIFICATIONS

8.1 FRONT PANEL

3
STEREO AMPLIFIER
Î
STANDBY/ON
STANDBY
2
POWER
1
OFF
ON
A SPEAKERS B
BASS
@
!
PHONES
~
=
1
POWER (
OFF/
Press to turn power to the unit ON and OFF.
2
STANDBY/ON switch/indicator
This is the switch for electric power.
This switch does not function unless the POWER
ON switch is set to ON.
ON
: When set to the ON position, power is supplied
and the unit becomes operational.
STANDBY : When set to the STANDBY position, the main
power flow is cut and the unit is no longer fully
operational. A minute flow of power feeds the unit
to maintain operation readiness.
When the STANDBY indicator lights, the unit is in
STANDBY.
NOTE:
When performing timer recording with this unit, be sure to set
the POWER STANDBY/ON switch to ON.
3
Remote control sensor window
4
VOLUME control
Use to adjust the volume level.
NOTE:
The TONE effect functions regardless of volume levels.
26
A-509R Direct Energy MOS
TREBLE
LOUDNESS
-
0
ON) switch
OFF/
4
VOLUME
DIRECT/
SB MODE
MIN
MAX
VOLUME indicator
9
5
INPUT SELECTOR knob/indicators
Turn the knob clockwise or counterclockwise so that the indica-
tor lights for your desired input source. Turning the knob clock-
wise causes the lit indicator to right. Turning counterclockwise
causes it to left.
CD
: For compact disc playback with a CD player.
TUNER
: For AM or FM broadcast reception with a tuner.
PHONO
: For record playback with a turntable.
LINE/SB
: Set to this position when listening to a program
TAPE 1/
: For playback with a cassette deck, CD recorder
CD-R/MD
6
TAPE 2 MONITOR button/indicator
Use when there is an adaptor component (graphic equalizer,
etc.) or cassette deck connected to the TAPE 2 MONITOR ter-
minals.
Off : Indicator goes out when not in use.
On : Indicator lights when using the adaptor component or
listening to the cassette deck.
NOTE:
When no connections are made to the TAPE 2 MONITOR termi-
nals, or when they are not in use, be sure to set this switch to the
off position. (No sound will be heard if it is set to the on position.)
5
TAPE 2
LINE/
TAPE 1/
CD
TUNER
PHONO
SB
CD-R/MD
MONITOR
BALANCE
INPUT SELECTOR
REC SELECTOR
CD
OFF
L
R
8
from a component connected to the LINE/SUR-
ROUND BACK terminals.
or MD recorder connected to the TAPE 1/CD-R/
MD terminals.
6
TUNER
7
SOURCE