Pioneer ELITE A6 Kullanım Talimatları Kılavuzu - Sayfa 12

Amplifikatör Pioneer ELITE A6 için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. Pioneer ELITE A6 24 sayfaları. Pioneer stereo receiver operating instructions

Sayfayı Yazdır
03
Controls and displays

Remote control

1
2
TONE/BAL
3
1
4
4
7
DISPLAY
10
BAND
ST
5
1
Switches the receiver between standby and on.
2
Input selector buttons
Press to select an input source.
3
TONE/BAL controls
Use to adjust the tone and balance (page 14).
4
Number buttons
Use the number buttons to directly select a
radio frequency (page 15).
 (TUNE/ST) /ENTER
5
Use the TUNE +/– buttons to find radio
frequencies and use ST +/– to find preset
stations (page 15).
6
DIMMER
Dims or brightens the display (or switches the
backlight off).
7
DIRECT
Press to access Direct listening (page 14).
12
En
DIMMER
6
TAPE
PHONO
TUNER
AUX1
AUX2
XM
7
DIRECT
L /
R /
8
VOL
2
3
9
5
6
MUTE
8
9
0
TUNE
CATEGORY D.ACCESS
MPX
ST
10
ENTER
T.EDIT
TUNE
RETURN
CLASS
STEREO RECEIVER
8
VOLUME +/–
Use to set the listening volume.
9
MUTE
Mutes/unmutes the sound.
10 Tuner and XM Radio controls
DISPLAY (XM Radio only) – Switches
between named station presets and radio
frequencies (page 15).
BAND (Tuner only) – Switches between the
AM and FM bands (page 15).
CATEGORY (XM Radio only) – Press to
browse digital radio broadcasts (page 17).
MPX (Tuner only) – Switches between
stereo and mono reception of FM
broadcasts (page 15).
D.ACCESS – Press to access a radio
station directly using the number buttons
(page 15).
T.EDIT – Memorizes/names stations for
recall (page 15).
CLASS – Switches between the three
banks of radio station presets (page 15).
RETURN (XM Radio only) – Press to confirm
and exit the current menu.

Using the remote control

Keep in mind the following when using the
remote control:
• Make sure that there are no obstacles
between the remote and the remote sensor
on the unit.
• The remote has a range of about 7 m (23 ft.)
at an angle of about 30º from the remote
sensor.
• Remote operation may become unreliable
if strong sunlight or fluorescent light is
shining on the unit's remote sensor.
• Remote controllers for different devices
can interfere with each other. Avoid using
remotes for other equipment located close
to this unit.