Pioneer GM-3500T Kullanıcı El Kitabı - Sayfa 8
Amplifikatör Pioneer GM-3500T için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Pioneer GM-3500T 37 sayfaları. Bridgeable two-channel power amplifier
Ayrıca Pioneer GM-3500T için: Kullanıcı El Kitabı (14 sayfalar), Kullanıcı El Kitabı (45 sayfalar)
Sayfayı Yazdır
Section
03
Connecting the units
Connections when using
the speaker input wire
Connect the car stereo speaker output wires
to the amplifier using the supplied speaker
input wire.
! Do not connect both the RCA input and the
speaker input at the same time.
1 Car Stereo
2 Speaker output
3 White/black: Left *
4 White: Left +
5 Gray/black: Right *
6 Gray: Right +
7 Speaker input connector
To speaker input terminal of this unit.
Connecting the power
terminal
The use of a special red battery and ground
wire RD-223, available separately, is recom-
mended. Connect the battery wire directly to
the car battery positive terminal + and the
ground wire to the car body.
WARNING
If the battery wire is not securely fixed to the term-
inal using the terminal screws, there is a risk of
overheating, malfunction and injury, including
minor burns.
1
Route battery wire from engine com-
partment to the vehicle interior.
After completing all other amplifier connec-
tions, finally connect the battery wire terminal
8
En
of the amplifier to the positive (+) battery
terminal.
1 Positive (+) terminal
2 Engine compartment
3 Vehicle interior
4 Fuse (30 A) × 2
5 Insert the O-ring rubber grommet into the
vehicle body.
6 Drill a 14 mm (1/2 in.) hole into the vehicle
body.
2
Twist the battery wire, ground wire
and system remote control wire.
3
Attach lugs to wire ends.
Use pliers, etc., to crimp lugs to wires.
1 Lug (sold separately)
2 Battery wire
3 Ground wire
4
Connect the wires to the terminal.
Fix the wires securely with the terminal
screws.
Twist